Optimization of cutting parameter under mql nanolubricant approach during cnc turnin using taguchi method /
Turning is one of the most important pocesses used in vareuous industrial application. usually the quality of finished part in turning operation is measured in terms of surface finish. In turn, surface quality and tool wear is determined by machining parameters that is cutting speed, feed rate, and...
সংরক্ষণ করুন:
| প্রধান লেখক: | |
|---|---|
| সংস্থা লেখক: | |
| বিন্যাস: | গবেষণাপত্র সফটওয়্যার বৈদ্যুতিন গ্রন্থ |
| ভাষা: | English |
| প্রকাশিত: |
Perlis, Malaysia
School of Manufacturing Engineering, University Malaysia Perlis
2016
|
| বিষয়গুলি: | |
| ট্যাগগুলো: |
ট্যাগ যুক্ত করুন
কোনো ট্যাগ নেই, প্রথমজন হিসাবে ট্যাগ করুন!
|
| সংক্ষিপ্ত: | Turning is one of the most important pocesses used in vareuous industrial application. usually the quality of finished part in turning operation is measured in terms of surface finish. In turn, surface quality and tool wear is determined by machining parameters that is cutting speed, feed rate, and depth of cut. The objective of this study is to investigate the effect of cutting parameters on surface finish and toolwear under MQL nanolubricant during turning operation of inconel 718. |
|---|---|
| দৈহিক বর্ননা: | 1 CD-ROM 12 cm |