Monitoring the temperature of the milling process using infrared camera /
During a machining process, heat is generated at the edge of the cutting tool. This heat is then dissipated through these four parameter that make up the process (1) the cutting tool, (2) the workpiece, (3) the chip formed and (4) the cutting fluid. High temperatures may cause a decrease is the life...
Đã lưu trong:
| Tác giả chính: | |
|---|---|
| Định dạng: | Luận văn Sách |
| Ngôn ngữ: | English |
| Được phát hành: |
Perlis, Malaysia
School of Manufacturing Engineering, University Malaysia Perlis
2016
|
| Những chủ đề: | |
| Các nhãn: |
Thêm thẻ
Không có thẻ, Là người đầu tiên thẻ bản ghi này!
|
| Tóm tắt: | During a machining process, heat is generated at the edge of the cutting tool. This heat is then dissipated through these four parameter that make up the process (1) the cutting tool, (2) the workpiece, (3) the chip formed and (4) the cutting fluid. High temperatures may cause a decrease is the life time of cutting tool. The objective is to determine the machining parameter that influences the heat generation at cutting tool in conventional milling process by monitoring the temperature at the cutting tool surface using infrared thermal imaging camera. |
|---|---|
| Mô tả vật lý: | x, 55 pages illustrations (some color) 30 cm. |