Burst strength and impact performance on glass fibre reinforced epoxy (GRE) composite pipes/
The GRE composite pipes are commonly produced by the filament winding technique. After the composite specimens were cut into required size, it was immersed in 80C water for periods of 500, 1000, and 1500 h to simulate the ageing effects. An instrumented impact testing machine with the drop weight sy...
Збережено в:
| Автор: | |
|---|---|
| Співавтор: | |
| Формат: | Дисертація Книга |
| Мова: | English |
| Опубліковано: |
Perlis, Malaysia
School of Mechatronic Engineering
2016
|
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Резюме: | The GRE composite pipes are commonly produced by the filament winding technique. After the composite specimens were cut into required size, it was immersed in 80C water for periods of 500, 1000, and 1500 h to simulate the ageing effects. An instrumented impact testing machine with the drop weight system was used to carry out the impact tests. Then the impacted specimens proceed with internal hydrostatic monotonic burst tests to determine the deformation behaviour of the composite pipes. Scanning electron microscopy (SEM) was used to analyse and characterize the inner and outer surface of the damage pipe wall. |
|---|---|
| Фізичний опис: | xiv, 110 pages colour illustration 30 cm. |
| Бібліографія: | Includes bibliographical references. |