Silicon nanowire sensor from electron beam litography : design, fabrication and characterization /
This study demonstrates the process development of silicon nanowires (SiNWs) sensor requires both the fabrication of nanoscale diameter wires and standard integration to CMOS process. There are three objectives that applied to this research work. The first objective is to design masks using GDSII Ed...
Guardat en:
| Autor principal: | |
|---|---|
| Autor corporatiu: | |
| Format: | Thesis Llibre |
| Idioma: | English |
| Publicat: |
Perlis, Malaysia
School of Microelectronic
2011.
|
| Matèries: | |
| Etiquetes: |
Afegir etiqueta
Sense etiquetes, Sigues el primer a etiquetar aquest registre!
|
| Sumari: | This study demonstrates the process development of silicon nanowires (SiNWs) sensor requires both the fabrication of nanoscale diameter wires and standard integration to CMOS process. There are three objectives that applied to this research work. The first objective is to design masks using GDSII Editor Software and AutoCAD, respectively. The second objective is to apply a top-down approach method consists of electron beam and conventional mixed lithography process for device fabrication. Then, the final objective of this work is to analyze the electrical characteristic of the fabricated device in terms of I-V relations using semiconductor parameter analyzer (SPA). |
|---|---|
| Descripció física: | 103 pages illustrations 30 cm |
| Bibliografia: | Includes bibliographical references (pages 91-97). |