Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)

Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)

Gorde:

Xehetasun bibliografikoak
Egile nagusia:	Safinah Nor Bt Jusoh (Egilea)
Formatua:	Liburua
Hizkuntza:	English
Gaiak:	Atomic force microscopy
Etiketak:	Etiketa erantsi Etiketarik gabe, Izan zaitez lehena erregistro honi etiketa jartzen!

Antzeko izenburuak

A study on surface roughness and morphology of Gallium Oxide Doped Ba0.5 Sr0.5 Ti03 thin film
nork: Fadrul Hisham Mohd Fauzi

Structural & electrical characterization of Ba(0.5)S(0.5)Tio3 thin films in effect annealing temperature
nork: Ramadhan Adnan

Effect of annealing temperature and dopant concertration on the surface layer of indium doped Ba0.5Sr0.5Ti03 thin film
nork: Noor Khairul Anuar Johari

Penghasilan katod komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2 O3) Samaria Terdop Seri Karbonat (SDCC) /
nork: Mohamed Hakim Ahmad Shah
Argitaratua: (2015)

Pengaruh suhu kalsium terhadap serbuk komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2)- samarium terdop seria karbonat (SDCC)/
nork: Shaibool Afandi Ladim
Argitaratua: (2016)

Analog circuit design techniques at 0.5℗V
Argitaratua: (2007)

Analog circuit design techniques at 0.5v /
nork: Chatterjee, Shouri
Argitaratua: (2007)

Analog circuit design techniques at 0.5v /
nork: Chatterjee, Shouri
Argitaratua: (2007)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
nork: Dyana Chahit
Argitaratua: (2017)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
nork: Dyana Chahit
Argitaratua: (2017)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
nork: Azzlyn Zurain Zamri
Argitaratua: (2019)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
nork: Azzlyn Zurain Zamri
Argitaratua: (2019)

Effect of post-reflow cooling rate and isothermal aging on imc formation between Sn-3.0Ag-0.5Cu-0.5Ni lead-free Solders and Enimag /
nork: Zolhafizi Jaidi
Argitaratua: (2016)

Harvard graphics 3.0/3.05.
Argitaratua: (1994)

Harvard graphics 3.0/3.05.
Argitaratua: (1994)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
nork: Nurilham Zakiah Nazarudin
Argitaratua: (2017)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
nork: Nurilham Zakiah Nazarudin
Argitaratua: (2017)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
nork: Mohammed Ahmed AbdulWahab
Argitaratua: (2016)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
nork: Mohammed Ahmed AbdulWahab
Argitaratua: (2016)

Load test of 0.5hp ac induction motor using coupling system /
nork: Ting Siu Hui
Argitaratua: (2011)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
nork: Haziezol Helmi Mohd Yusof, et al.
Argitaratua: (2017)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
nork: Haziezol Helmi Mohd Yusof, et al.
Argitaratua: (2017)

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
nork: Muhammad Afiq Bin Mohd Razak
Argitaratua: (2016)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
nork: Anayet Karim
Argitaratua: (2014)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
nork: Anayet Karim
Argitaratua: (2014)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
nork: Yanawati Yahya
Argitaratua: (2016)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
nork: Yanawati Yahya
Argitaratua: (2016)

Mengkaji corak semburan yang dihasilkan oleh nozzle rekabentuk mudah dan komplek terhadap perubahan tekanan (0.5, 1.0, 1.5, 2.0, 2.5 dan 3.0 bar) /
nork: Mohd Lutfi Suhaini
Argitaratua: (2015)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
nork: Josphene J. Endam
Argitaratua: (2005)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
nork: Nor Shafiqin Sahrifuddin
Argitaratua: (2012)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
nork: Nor Shafiqin Sahrifuddin
Argitaratua: (2012)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
nork: Josphene J. Endam
Argitaratua: (2005)

Psychology 04/05
Argitaratua: (2004)

Health 04/05
Argitaratua: (2004)

Psychology 04/05
Argitaratua: (2004)

Health 04/05
Argitaratua: (2004)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
nork: Khairul Nazri Taha

Marketing 05/06 : annual editions /
Argitaratua: (2005)

Introduction to photoshop 4.0/5.0 /
nork: Thomas, Suzanne Sayegh
Argitaratua: (1999)

Foundations of logic 1903 - 05 /
nork: Russell, Bertrand
Argitaratua: (1994)