Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)

Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)

Na minha lista:

Detalhes bibliográficos
Autor principal:	Safinah Nor Bt Jusoh (Author)
Formato:	Livro
Idioma:	English
Assuntos:	Atomic force microscopy
Tags:	Adicionar Tag Sem tags, seja o primeiro a adicionar uma tag!

Registos relacionados

A study on surface roughness and morphology of Gallium Oxide Doped Ba0.5 Sr0.5 Ti03 thin film
Por: Fadrul Hisham Mohd Fauzi

Structural & electrical characterization of Ba(0.5)S(0.5)Tio3 thin films in effect annealing temperature
Por: Ramadhan Adnan

Effect of annealing temperature and dopant concertration on the surface layer of indium doped Ba0.5Sr0.5Ti03 thin film
Por: Noor Khairul Anuar Johari

Penghasilan katod komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2 O3) Samaria Terdop Seri Karbonat (SDCC) /
Por: Mohamed Hakim Ahmad Shah
Publicado em: (2015)

Pengaruh suhu kalsium terhadap serbuk komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2)- samarium terdop seria karbonat (SDCC)/
Por: Shaibool Afandi Ladim
Publicado em: (2016)

Analog circuit design techniques at 0.5℗V
Publicado em: (2007)

Analog circuit design techniques at 0.5v /
Por: Chatterjee, Shouri
Publicado em: (2007)

Analog circuit design techniques at 0.5v /
Por: Chatterjee, Shouri
Publicado em: (2007)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
Por: Dyana Chahit
Publicado em: (2017)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
Por: Dyana Chahit
Publicado em: (2017)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
Por: Azzlyn Zurain Zamri
Publicado em: (2019)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
Por: Azzlyn Zurain Zamri
Publicado em: (2019)

Effect of post-reflow cooling rate and isothermal aging on imc formation between Sn-3.0Ag-0.5Cu-0.5Ni lead-free Solders and Enimag /
Por: Zolhafizi Jaidi
Publicado em: (2016)

Harvard graphics 3.0/3.05.
Publicado em: (1994)

Harvard graphics 3.0/3.05.
Publicado em: (1994)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
Por: Nurilham Zakiah Nazarudin
Publicado em: (2017)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
Por: Nurilham Zakiah Nazarudin
Publicado em: (2017)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
Por: Mohammed Ahmed AbdulWahab
Publicado em: (2016)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
Por: Mohammed Ahmed AbdulWahab
Publicado em: (2016)

Load test of 0.5hp ac induction motor using coupling system /
Por: Ting Siu Hui
Publicado em: (2011)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
Por: Haziezol Helmi Mohd Yusof, et al.
Publicado em: (2017)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
Por: Haziezol Helmi Mohd Yusof, et al.
Publicado em: (2017)

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
Por: Muhammad Afiq Bin Mohd Razak
Publicado em: (2016)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
Por: Anayet Karim
Publicado em: (2014)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
Por: Anayet Karim
Publicado em: (2014)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
Por: Yanawati Yahya
Publicado em: (2016)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
Por: Yanawati Yahya
Publicado em: (2016)

Mengkaji corak semburan yang dihasilkan oleh nozzle rekabentuk mudah dan komplek terhadap perubahan tekanan (0.5, 1.0, 1.5, 2.0, 2.5 dan 3.0 bar) /
Por: Mohd Lutfi Suhaini
Publicado em: (2015)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
Por: Josphene J. Endam
Publicado em: (2005)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
Por: Nor Shafiqin Sahrifuddin
Publicado em: (2012)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
Por: Nor Shafiqin Sahrifuddin
Publicado em: (2012)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
Por: Josphene J. Endam
Publicado em: (2005)

Psychology 04/05
Publicado em: (2004)

Health 04/05
Publicado em: (2004)

Psychology 04/05
Publicado em: (2004)

Health 04/05
Publicado em: (2004)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
Por: Khairul Nazri Taha

Marketing 05/06 : annual editions /
Publicado em: (2005)

Introduction to photoshop 4.0/5.0 /
Por: Thomas, Suzanne Sayegh
Publicado em: (1999)

Foundations of logic 1903 - 05 /
Por: Russell, Bertrand
Publicado em: (1994)