Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)

Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)

Сохранить в:

Библиографические подробности
Главный автор:	Safinah Nor Bt Jusoh (Автор)
Формат:	‌
Язык:	English
Предметы:	Atomic force microscopy
Метки:	Добавить метку Нет меток, Требуется 1-ая метка записи!

Схожие документы

A study on surface roughness and morphology of Gallium Oxide Doped Ba0.5 Sr0.5 Ti03 thin film
по: Fadrul Hisham Mohd Fauzi

Structural & electrical characterization of Ba(0.5)S(0.5)Tio3 thin films in effect annealing temperature
по: Ramadhan Adnan

Effect of annealing temperature and dopant concertration on the surface layer of indium doped Ba0.5Sr0.5Ti03 thin film
по: Noor Khairul Anuar Johari

Penghasilan katod komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2 O3) Samaria Terdop Seri Karbonat (SDCC) /
по: Mohamed Hakim Ahmad Shah
Опубликовано: (2015)

Pengaruh suhu kalsium terhadap serbuk komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2)- samarium terdop seria karbonat (SDCC)/
по: Shaibool Afandi Ladim
Опубликовано: (2016)

Analog circuit design techniques at 0.5℗V
Опубликовано: (2007)

Analog circuit design techniques at 0.5v /
по: Chatterjee, Shouri
Опубликовано: (2007)

Analog circuit design techniques at 0.5v /
по: Chatterjee, Shouri
Опубликовано: (2007)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
по: Dyana Chahit
Опубликовано: (2017)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
по: Dyana Chahit
Опубликовано: (2017)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
по: Azzlyn Zurain Zamri
Опубликовано: (2019)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
по: Azzlyn Zurain Zamri
Опубликовано: (2019)

Effect of post-reflow cooling rate and isothermal aging on imc formation between Sn-3.0Ag-0.5Cu-0.5Ni lead-free Solders and Enimag /
по: Zolhafizi Jaidi
Опубликовано: (2016)

Harvard graphics 3.0/3.05.
Опубликовано: (1994)

Harvard graphics 3.0/3.05.
Опубликовано: (1994)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
по: Nurilham Zakiah Nazarudin
Опубликовано: (2017)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
по: Nurilham Zakiah Nazarudin
Опубликовано: (2017)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
по: Mohammed Ahmed AbdulWahab
Опубликовано: (2016)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
по: Mohammed Ahmed AbdulWahab
Опубликовано: (2016)

Load test of 0.5hp ac induction motor using coupling system /
по: Ting Siu Hui
Опубликовано: (2011)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
по: Haziezol Helmi Mohd Yusof, и др.
Опубликовано: (2017)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
по: Haziezol Helmi Mohd Yusof, и др.
Опубликовано: (2017)

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
по: Muhammad Afiq Bin Mohd Razak
Опубликовано: (2016)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
по: Anayet Karim
Опубликовано: (2014)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
по: Anayet Karim
Опубликовано: (2014)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
по: Yanawati Yahya
Опубликовано: (2016)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
по: Yanawati Yahya
Опубликовано: (2016)

Mengkaji corak semburan yang dihasilkan oleh nozzle rekabentuk mudah dan komplek terhadap perubahan tekanan (0.5, 1.0, 1.5, 2.0, 2.5 dan 3.0 bar) /
по: Mohd Lutfi Suhaini
Опубликовано: (2015)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
по: Josphene J. Endam
Опубликовано: (2005)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
по: Nor Shafiqin Sahrifuddin
Опубликовано: (2012)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
по: Nor Shafiqin Sahrifuddin
Опубликовано: (2012)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
по: Josphene J. Endam
Опубликовано: (2005)

Psychology 04/05
Опубликовано: (2004)

Health 04/05
Опубликовано: (2004)

Psychology 04/05
Опубликовано: (2004)

Health 04/05
Опубликовано: (2004)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
по: Khairul Nazri Taha

Marketing 05/06 : annual editions /
Опубликовано: (2005)

Introduction to photoshop 4.0/5.0 /
по: Thomas, Suzanne Sayegh
Опубликовано: (1999)

Foundations of logic 1903 - 05 /
по: Russell, Bertrand
Опубликовано: (1994)