The effect of alloying elements in sintered-recycle steel compaction

The effect of alloying elements in sintered-recycle steel compaction

The objectives ought to be accomplished in this research are to fabricate AISI 403, 410 and 414 stainless steel from waste machining steel chip, to study the effect of alloying elements (nickel and chromium) in the alloyed steels and to observe the mechanical properties and microstructure of the pro...

Повний опис

Збережено в:

Бібліографічні деталі
Автор:	Mohd Fauzi Jaafar (Автор)
Формат:	Електронний ресурс Довідковий матеріал
Мова:	English
Предмети:	Metallurgy.
Теги:	Додати тег Немає тегів, Будьте першим, хто поставить тег для цього запису!

Схожі ресурси

The anodizing of sintered mg/ca alloys/
за авторством: Norhadira Fatin Binti Wardi
Опубліковано: (2016)

Sintering atmosphere effect on AI-0.2mg alloy
за авторством: Muhammad Firdaus Rosli

Synthesis and characterization of fe-al alloy with different sintering temperature
за авторством: Maimum Razali

Effect of sintering condition on the properties of silicate ceramic materials
за авторством: Muhamad Hanifa Mohamad

Sintering behavior and microstructural characterization of aluminium copper powder compact (al-4.4cu-0.8si-0.5mgwt%) alloy prepared by powder metallurgy
за авторством: Looi, Mei Yen

Surface modification of low carbon steel and alloy steel by boriding diffusion coating/
за авторством: Asilah Bt Syed Abdul Wahab
Опубліковано: (2016)

Effect Geopolymer Coating On Mild Steel /
за авторством: Muhammad Faiz Bin Mohd Fazill
Опубліковано: (2016)

Effects of high weight percent of space holder on porosity and microstructure of aluminum foam manufacturated by sintering-dissolution process (sdp) /
за авторством: Nur Hazwani Mohd Yusoff
Опубліковано: (2016)

The effect of recycling to the properties of different brands of polyethylene terephthalate (pet) bottle /
за авторством: Norwahida Binti Zakaria
Опубліковано: (2016)

The effect of sintering temperature to the synthetic and natural hydroxyapatite (HA) added with 1% tin (IV) oxide (Sno2) as additive
за авторством: Nor Izurah Ismail

Effects of Recycled HDPE/PET Blend Compositions and Compatibilizer Employment on The Mechanical and Thermal Properties /
за авторством: Nur Fatin Nisa Abu Bakar
Опубліковано: (2017)

Effect of solution treatment temperature on the microstructure of fe-40ni-24cr alloy /
за авторством: Nuraliah Nazirah Mohd Hassan
Опубліковано: (2016)

The effect of different particle size of steel slag as filler in concrete/
за авторством: Ellisha Anak Iling
Опубліковано: (2016)

Direct growth of Cnms on stainless steel (effect of surface roughness)/
за авторством: Muhammad Izzhar Abd Malik
Опубліковано: (2016)

The Effect of Nickel Addition for Glass Formability of Cu-Ti-Ni Amorphous Alloy /
за авторством: Wan Ahmad Aiman Wan Salleh
Опубліковано: (2017)

Study the different sintering temperature for Fe-11wt%Co/20wt%SiC composite an the composite will be fabricated via powder metallury method consists of mixing, compation and sintering processes
за авторством: Durairaj Ehambron

Electroplating Copper on Aluminium Alloy/
за авторством: Nurhafizah Binti Ku Abdullah
Опубліковано: (2016)

Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
за авторством: Izrul Azree Mohd Zaki

Mechanical studies of chitosan filled recycled low density polyethylene biocomposites /
за авторством: Siti Shuhada Binti Mohd Yusof
Опубліковано: (2016)

The Effect Of Iron Addition And Tungsten Content On The Corrosion Resistance Of W-Pre Alloy Brass Composite/
за авторством: Rozi Bin Ewol
Опубліковано: (2016)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
за авторством: Khairul Nazri Taha

Recycled natural rubber toughened epoxy/graphene conductive materials /
за авторством: Lee, Lye Kee
Опубліковано: (2016)

The thermal properties of aluminium hydroxide as filler in recycled pp composite /
за авторством: Nurul Hazirah Binti A.Halim
Опубліковано: (2016)

Study effect of welding current on mechanical properties of galvanized steel sheets in resistance spotwelding
за авторством: Muhammad Rifki Ismail

Effect of Zinc Additions on SN-0.7CU-0.05NI Lead Free Solder Alloy /
за авторством: Nurul Ashikin Saleh
Опубліковано: (2017)

Study on corrosion properties of stainless steel
за авторством: Abang Fairol Abang Sarbini

Anodizing process of Mg alloy using low potential /
за авторством: Siti Auni Shafiqah Makhtar
Опубліковано: (2017)

Development of Al-Ni-Cu Amorphous Alloy Powder /
за авторством: Norliyana Mustapar
Опубліковано: (2017)

Modelling aging kinetics of aluminium alloy aa2124/
за авторством: Tiaw, Wei Ping
Опубліковано: (2016)

Modelling aging kinetics of aluminium alloy AA2124/
за авторством: Mohamad Zulhilmi Bin Md Nasir
Опубліковано: (2016)

The study of ultrasonic wave propagation in welded austenitic stainless steel
за авторством: Mohd Faizal Esran

Study On The Microstructure and Properties of Al-Zn Alloy Fabricated By Sand Casting Process /
за авторством: Syed Mohd Fikri Syed Sulaiman
Опубліковано: (2017)

Study the mechanical properties and microstructure on steel products
за авторством: Khairul Nizam Hashim

Microstructural and thermal studies of as-cast al-si-mg alloys
за авторством: Lokman Hakim Ibrahim

Mechanical properties of polyurethane composite foams filled with kenaf fiber and recycle tyre rubber /
за авторством: Muhamad Hafizan Bin Abd Ghani
Опубліковано: (2015)

Infuence of grain size on isothermal oxidation of fe-33ni-19cr alloy/
за авторством: Izzat Bin Mohd Noor
Опубліковано: (2016)

The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
за авторством: Mohamed Faisol Mohamed Nor

Fabrication of Al-based Metallic Glasses by Mechanical Alloying and Hot Consolidation /
за авторством: Ng, Chun Ming
Опубліковано: (2017)

Conductive coating strategy for magnesium alloy as a surface protection and relliability
за авторством: Ooi, Peng Sheng

A study of dissimilar welding between mild steel and stainless steel on hardness and tensile shear test for gas tungsten arc welding (GTAW)
за авторством: Ahmad Safwan Salim