The effect of alloying elements in sintered-recycle steel compaction

The effect of alloying elements in sintered-recycle steel compaction

The objectives ought to be accomplished in this research are to fabricate AISI 403, 410 and 414 stainless steel from waste machining steel chip, to study the effect of alloying elements (nickel and chromium) in the alloyed steels and to observe the mechanical properties and microstructure of the pro...

Mô tả đầy đủ

Đã lưu trong:

Chi tiết về thư mục
Tác giả chính:	Mohd Fauzi Jaafar (Tác giả)
Định dạng:	Điện tử Tài liệu tham khảo
Ngôn ngữ:	English
Những chủ đề:	Metallurgy.
Các nhãn:	Thêm thẻ Không có thẻ, Là người đầu tiên thẻ bản ghi này!

Những quyển sách tương tự

The anodizing of sintered mg/ca alloys/
Bằng: Norhadira Fatin Binti Wardi
Được phát hành: (2016)

Sintering atmosphere effect on AI-0.2mg alloy
Bằng: Muhammad Firdaus Rosli

Synthesis and characterization of fe-al alloy with different sintering temperature
Bằng: Maimum Razali

Effect of sintering condition on the properties of silicate ceramic materials
Bằng: Muhamad Hanifa Mohamad

Sintering behavior and microstructural characterization of aluminium copper powder compact (al-4.4cu-0.8si-0.5mgwt%) alloy prepared by powder metallurgy
Bằng: Looi, Mei Yen

Surface modification of low carbon steel and alloy steel by boriding diffusion coating/
Bằng: Asilah Bt Syed Abdul Wahab
Được phát hành: (2016)

Effect Geopolymer Coating On Mild Steel /
Bằng: Muhammad Faiz Bin Mohd Fazill
Được phát hành: (2016)

Effects of high weight percent of space holder on porosity and microstructure of aluminum foam manufacturated by sintering-dissolution process (sdp) /
Bằng: Nur Hazwani Mohd Yusoff
Được phát hành: (2016)

The effect of recycling to the properties of different brands of polyethylene terephthalate (pet) bottle /
Bằng: Norwahida Binti Zakaria
Được phát hành: (2016)

The effect of sintering temperature to the synthetic and natural hydroxyapatite (HA) added with 1% tin (IV) oxide (Sno2) as additive
Bằng: Nor Izurah Ismail

Effects of Recycled HDPE/PET Blend Compositions and Compatibilizer Employment on The Mechanical and Thermal Properties /
Bằng: Nur Fatin Nisa Abu Bakar
Được phát hành: (2017)

Effect of solution treatment temperature on the microstructure of fe-40ni-24cr alloy /
Bằng: Nuraliah Nazirah Mohd Hassan
Được phát hành: (2016)

The effect of different particle size of steel slag as filler in concrete/
Bằng: Ellisha Anak Iling
Được phát hành: (2016)

Direct growth of Cnms on stainless steel (effect of surface roughness)/
Bằng: Muhammad Izzhar Abd Malik
Được phát hành: (2016)

The Effect of Nickel Addition for Glass Formability of Cu-Ti-Ni Amorphous Alloy /
Bằng: Wan Ahmad Aiman Wan Salleh
Được phát hành: (2017)

Study the different sintering temperature for Fe-11wt%Co/20wt%SiC composite an the composite will be fabricated via powder metallury method consists of mixing, compation and sintering processes
Bằng: Durairaj Ehambron

Electroplating Copper on Aluminium Alloy/
Bằng: Nurhafizah Binti Ku Abdullah
Được phát hành: (2016)

Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
Bằng: Izrul Azree Mohd Zaki

Mechanical studies of chitosan filled recycled low density polyethylene biocomposites /
Bằng: Siti Shuhada Binti Mohd Yusof
Được phát hành: (2016)

The Effect Of Iron Addition And Tungsten Content On The Corrosion Resistance Of W-Pre Alloy Brass Composite/
Bằng: Rozi Bin Ewol
Được phát hành: (2016)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
Bằng: Khairul Nazri Taha

Recycled natural rubber toughened epoxy/graphene conductive materials /
Bằng: Lee, Lye Kee
Được phát hành: (2016)

The thermal properties of aluminium hydroxide as filler in recycled pp composite /
Bằng: Nurul Hazirah Binti A.Halim
Được phát hành: (2016)

Study effect of welding current on mechanical properties of galvanized steel sheets in resistance spotwelding
Bằng: Muhammad Rifki Ismail

Effect of Zinc Additions on SN-0.7CU-0.05NI Lead Free Solder Alloy /
Bằng: Nurul Ashikin Saleh
Được phát hành: (2017)

Study on corrosion properties of stainless steel
Bằng: Abang Fairol Abang Sarbini

Anodizing process of Mg alloy using low potential /
Bằng: Siti Auni Shafiqah Makhtar
Được phát hành: (2017)

Development of Al-Ni-Cu Amorphous Alloy Powder /
Bằng: Norliyana Mustapar
Được phát hành: (2017)

Modelling aging kinetics of aluminium alloy aa2124/
Bằng: Tiaw, Wei Ping
Được phát hành: (2016)

Modelling aging kinetics of aluminium alloy AA2124/
Bằng: Mohamad Zulhilmi Bin Md Nasir
Được phát hành: (2016)

The study of ultrasonic wave propagation in welded austenitic stainless steel
Bằng: Mohd Faizal Esran

Study On The Microstructure and Properties of Al-Zn Alloy Fabricated By Sand Casting Process /
Bằng: Syed Mohd Fikri Syed Sulaiman
Được phát hành: (2017)

Study the mechanical properties and microstructure on steel products
Bằng: Khairul Nizam Hashim

Microstructural and thermal studies of as-cast al-si-mg alloys
Bằng: Lokman Hakim Ibrahim

Mechanical properties of polyurethane composite foams filled with kenaf fiber and recycle tyre rubber /
Bằng: Muhamad Hafizan Bin Abd Ghani
Được phát hành: (2015)

Infuence of grain size on isothermal oxidation of fe-33ni-19cr alloy/
Bằng: Izzat Bin Mohd Noor
Được phát hành: (2016)

The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
Bằng: Mohamed Faisol Mohamed Nor

Fabrication of Al-based Metallic Glasses by Mechanical Alloying and Hot Consolidation /
Bằng: Ng, Chun Ming
Được phát hành: (2017)

Conductive coating strategy for magnesium alloy as a surface protection and relliability
Bằng: Ooi, Peng Sheng

A study of dissimilar welding between mild steel and stainless steel on hardness and tensile shear test for gas tungsten arc welding (GTAW)
Bằng: Ahmad Safwan Salim