The effect of alloying elements in sintered-recycle steel compaction

The effect of alloying elements in sintered-recycle steel compaction

The objectives ought to be accomplished in this research are to fabricate AISI 403, 410 and 414 stainless steel from waste machining steel chip, to study the effect of alloying elements (nickel and chromium) in the alloyed steels and to observe the mechanical properties and microstructure of the pro...

Description complète

Enregistré dans:

Détails bibliographiques
Auteur principal:	Mohd Fauzi Jaafar (Auteur)
Format:	Électronique Ouvrage de référence
Langue:	English
Sujets:	Metallurgy.
Tags:	Ajouter un tag Pas de tags, Soyez le premier à ajouter un tag!

Documents similaires

The anodizing of sintered mg/ca alloys/
par: Norhadira Fatin Binti Wardi
Publié: (2016)

Sintering atmosphere effect on AI-0.2mg alloy
par: Muhammad Firdaus Rosli

Synthesis and characterization of fe-al alloy with different sintering temperature
par: Maimum Razali

Effect of sintering condition on the properties of silicate ceramic materials
par: Muhamad Hanifa Mohamad

Sintering behavior and microstructural characterization of aluminium copper powder compact (al-4.4cu-0.8si-0.5mgwt%) alloy prepared by powder metallurgy
par: Looi, Mei Yen

Surface modification of low carbon steel and alloy steel by boriding diffusion coating/
par: Asilah Bt Syed Abdul Wahab
Publié: (2016)

Effect Geopolymer Coating On Mild Steel /
par: Muhammad Faiz Bin Mohd Fazill
Publié: (2016)

Effects of high weight percent of space holder on porosity and microstructure of aluminum foam manufacturated by sintering-dissolution process (sdp) /
par: Nur Hazwani Mohd Yusoff
Publié: (2016)

The effect of recycling to the properties of different brands of polyethylene terephthalate (pet) bottle /
par: Norwahida Binti Zakaria
Publié: (2016)

The effect of sintering temperature to the synthetic and natural hydroxyapatite (HA) added with 1% tin (IV) oxide (Sno2) as additive
par: Nor Izurah Ismail

Effects of Recycled HDPE/PET Blend Compositions and Compatibilizer Employment on The Mechanical and Thermal Properties /
par: Nur Fatin Nisa Abu Bakar
Publié: (2017)

Effect of solution treatment temperature on the microstructure of fe-40ni-24cr alloy /
par: Nuraliah Nazirah Mohd Hassan
Publié: (2016)

The effect of different particle size of steel slag as filler in concrete/
par: Ellisha Anak Iling
Publié: (2016)

Direct growth of Cnms on stainless steel (effect of surface roughness)/
par: Muhammad Izzhar Abd Malik
Publié: (2016)

The Effect of Nickel Addition for Glass Formability of Cu-Ti-Ni Amorphous Alloy /
par: Wan Ahmad Aiman Wan Salleh
Publié: (2017)

Study the different sintering temperature for Fe-11wt%Co/20wt%SiC composite an the composite will be fabricated via powder metallury method consists of mixing, compation and sintering processes
par: Durairaj Ehambron

Electroplating Copper on Aluminium Alloy/
par: Nurhafizah Binti Ku Abdullah
Publié: (2016)

Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
par: Izrul Azree Mohd Zaki

Mechanical studies of chitosan filled recycled low density polyethylene biocomposites /
par: Siti Shuhada Binti Mohd Yusof
Publié: (2016)

The Effect Of Iron Addition And Tungsten Content On The Corrosion Resistance Of W-Pre Alloy Brass Composite/
par: Rozi Bin Ewol
Publié: (2016)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
par: Khairul Nazri Taha

Recycled natural rubber toughened epoxy/graphene conductive materials /
par: Lee, Lye Kee
Publié: (2016)

The thermal properties of aluminium hydroxide as filler in recycled pp composite /
par: Nurul Hazirah Binti A.Halim
Publié: (2016)

Study effect of welding current on mechanical properties of galvanized steel sheets in resistance spotwelding
par: Muhammad Rifki Ismail

Effect of Zinc Additions on SN-0.7CU-0.05NI Lead Free Solder Alloy /
par: Nurul Ashikin Saleh
Publié: (2017)

Study on corrosion properties of stainless steel
par: Abang Fairol Abang Sarbini

Anodizing process of Mg alloy using low potential /
par: Siti Auni Shafiqah Makhtar
Publié: (2017)

Development of Al-Ni-Cu Amorphous Alloy Powder /
par: Norliyana Mustapar
Publié: (2017)

Modelling aging kinetics of aluminium alloy aa2124/
par: Tiaw, Wei Ping
Publié: (2016)

Modelling aging kinetics of aluminium alloy AA2124/
par: Mohamad Zulhilmi Bin Md Nasir
Publié: (2016)

The study of ultrasonic wave propagation in welded austenitic stainless steel
par: Mohd Faizal Esran

Study On The Microstructure and Properties of Al-Zn Alloy Fabricated By Sand Casting Process /
par: Syed Mohd Fikri Syed Sulaiman
Publié: (2017)

Study the mechanical properties and microstructure on steel products
par: Khairul Nizam Hashim

Microstructural and thermal studies of as-cast al-si-mg alloys
par: Lokman Hakim Ibrahim

Mechanical properties of polyurethane composite foams filled with kenaf fiber and recycle tyre rubber /
par: Muhamad Hafizan Bin Abd Ghani
Publié: (2015)

Infuence of grain size on isothermal oxidation of fe-33ni-19cr alloy/
par: Izzat Bin Mohd Noor
Publié: (2016)

The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
par: Mohamed Faisol Mohamed Nor

Fabrication of Al-based Metallic Glasses by Mechanical Alloying and Hot Consolidation /
par: Ng, Chun Ming
Publié: (2017)

Conductive coating strategy for magnesium alloy as a surface protection and relliability
par: Ooi, Peng Sheng

A study of dissimilar welding between mild steel and stainless steel on hardness and tensile shear test for gas tungsten arc welding (GTAW)
par: Ahmad Safwan Salim