Effect of annealing temperature and dopant concertration on the surface layer of indium doped Ba0.5Sr0.5Ti03 thin film

Effect of annealing temperature and dopant concertration on the surface layer of indium doped Ba0.5Sr0.5Ti03 thin film

The purpose of this project is to fabricate barium strontium titanate (BST) and Indium doped barium strontium titanate (BIST) thin films using the chemical solution deposition (CSD) method with 1.00 M precursor.

Sparad:

Bibliografiska uppgifter
Huvudupphovsman:	Noor Khairul Anuar Johari (Författare, medförfattare)
Materialtyp:	Elektronisk Datorprogram Databas
Språk:	English
Ämnen:	Microelectronics.
Taggar:	Lägg till en tagg Inga taggar, Lägg till första taggen!

Liknande verk

A study on surface roughness and morphology of Gallium Oxide Doped Ba0.5 Sr0.5 Ti03 thin film
av: Fadrul Hisham Mohd Fauzi

Structural & electrical characterization of Ba(0.5)S(0.5)Tio3 thin films in effect annealing temperature
av: Ramadhan Adnan

Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)
av: Safinah Nor Bt Jusoh

Penghasilan katod komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2 O3) Samaria Terdop Seri Karbonat (SDCC) /
av: Mohamed Hakim Ahmad Shah
Publicerad: (2015)

Pengaruh suhu kalsium terhadap serbuk komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2)- samarium terdop seria karbonat (SDCC)/
av: Shaibool Afandi Ladim
Publicerad: (2016)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
av: Dyana Chahit
Publicerad: (2017)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
av: Dyana Chahit
Publicerad: (2017)

Analog circuit design techniques at 0.5℗V
Publicerad: (2007)

Analog circuit design techniques at 0.5v /
av: Chatterjee, Shouri
Publicerad: (2007)

Analog circuit design techniques at 0.5v /
av: Chatterjee, Shouri
Publicerad: (2007)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
av: Azzlyn Zurain Zamri
Publicerad: (2019)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
av: Azzlyn Zurain Zamri
Publicerad: (2019)

Effect of post-reflow cooling rate and isothermal aging on imc formation between Sn-3.0Ag-0.5Cu-0.5Ni lead-free Solders and Enimag /
av: Zolhafizi Jaidi
Publicerad: (2016)

Harvard graphics 3.0/3.05.
Publicerad: (1994)

Harvard graphics 3.0/3.05.
Publicerad: (1994)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
av: Nurilham Zakiah Nazarudin
Publicerad: (2017)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
av: Nurilham Zakiah Nazarudin
Publicerad: (2017)

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
av: Muhammad Afiq Bin Mohd Razak
Publicerad: (2016)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
av: Mohammed Ahmed AbdulWahab
Publicerad: (2016)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
av: Mohammed Ahmed AbdulWahab
Publicerad: (2016)

Load test of 0.5hp ac induction motor using coupling system /
av: Ting Siu Hui
Publicerad: (2011)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
av: Haziezol Helmi Mohd Yusof, et al.
Publicerad: (2017)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
av: Haziezol Helmi Mohd Yusof, et al.
Publicerad: (2017)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
av: Anayet Karim
Publicerad: (2014)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
av: Anayet Karim
Publicerad: (2014)

Middle School Get Me Out Osd 03/05
av: Patterson James

Middle School Get Me Out Osd 03/05
av: Patterson James

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
av: Yanawati Yahya
Publicerad: (2016)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
av: Yanawati Yahya
Publicerad: (2016)

Mengkaji corak semburan yang dihasilkan oleh nozzle rekabentuk mudah dan komplek terhadap perubahan tekanan (0.5, 1.0, 1.5, 2.0, 2.5 dan 3.0 bar) /
av: Mohd Lutfi Suhaini
Publicerad: (2015)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
av: Josphene J. Endam
Publicerad: (2005)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
av: Nor Shafiqin Sahrifuddin
Publicerad: (2012)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
av: Nor Shafiqin Sahrifuddin
Publicerad: (2012)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
av: Josphene J. Endam
Publicerad: (2005)

Psychology 04/05
Publicerad: (2004)

Health 04/05
Publicerad: (2004)

Psychology 04/05
Publicerad: (2004)

Health 04/05
Publicerad: (2004)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
av: Khairul Nazri Taha

The effect of annealing temperature and dopant concentration on the surface layer of vanadium doped barium strontium titanate (BVST) thin film
av: Siti Norhaida Abdul Rahman