Optimization of nitride deposition process using Taguchi method

Optimization of nitride deposition process using Taguchi method

This final year project is mainly focused on obtaining the most optimize parameters of PECVD Si3N4 deposition process by using DOE. The Taguchi method of DOE will be used in performing optimization of the deposition process. Raw data for the deposition process is provided by the deposition module fr...

Повний опис

Збережено в:

Бібліографічні деталі
Автор:	Low, Zen Shiang (Автор)
Формат:	Електронний ресурс Програмне забезпечення База даних
Мова:	English
Предмети:	Microelectronics.
Теги:	Додати тег Немає тегів, Будьте першим, хто поставить тег для цього запису!

Схожі ресурси

Comparison of etching optimization process by taguchi method using minitab and design expert software
за авторством: Azleen Abu Talib

Analysis of MEMS accelerometer sensor by using taguchi optimization method /
за авторством: Nurul Izati Md. Johan
Опубліковано: (2015)

Analysis of MEMS accelerometer sensor by using taguchi optimization method /
за авторством: Nurul Izati Md. Johan
Опубліковано: (2015)

Optimization on oxidation process using 2K factorial design method
за авторством: Yeap, Li Chain

Analysis of deposited carbon based on electron beam induced deposition in scanning electron microscopy using secondary ion mass spectrometry
за авторством: Nur Liana Kamal

Study of deposition time influence the conical structure during electron beam induced deposition (EBID)
за авторством: Mohamad Shahrizal Md Ilias

The influence on the accelerating voltages on the growth of the square structure during electron beam induced deposition (EBID) method
за авторством: Muhammad Afiq Abdul Aziz

Analysis of square shaped microstructure based electron bean induced deposition
за авторством: Siti Fatimah Abdul Rahman

Electrical characterization of 0.15um CMOS transistor using tsuprem-4 and medici
за авторством: Low, Pooi Lam

Optimization of glucose production from rice husk by using cellulase enzyme /
за авторством: Nurhidayah Kamaruddin
Опубліковано: (2013)

Simulation of ion implantation using Monte Carlo method for investigation on ion trajectories
за авторством: Zainab Ramli

Study of the thickness of the silicon dioxide on wafer using dry and wet oxidation method
за авторством: Mohamad Fadzli Ali

Intrusion detectionsystem
за авторством: Low Kar Xin
Опубліковано: (2015)

Polysilicon process development - the effect of pecvd process parameters on the film characteristics
за авторством: Mujahidun Mashuri

Method of measurement of LTCC metallization thickness
за авторством: Lee, Soo Khiang

Thin polycrystalline silicon process development
за авторством: Muniyati Pakhuruddin

Comparison of Delays Between 4-Bits Ripple-Carry Adder And 4-Bits Carry Look-Ahead Adder Using Logical Effort Method/
за авторством: Siti Nurhanani Che Yahya
Опубліковано: (2011)

Semiconductor optical amplifier (SOA) for photonic signal processing/
за авторством: Latty Shazana Ismail
Опубліковано: (2011)

Area array packaging processes : for BGA, flip chip and CSP /
Опубліковано: (2004)

Area array packaging processes : for BGA, Flip Chip, and CSP /

Fabrication of 50 ¡Łm transistor and AINiAu interconnection process
за авторством: Shaffie Husin

Design and Analysis of a Digital Signal Processing for Biomedical Application System/
за авторством: Ch'ng, Ei Peng
Опубліковано: (2011)

Automated classroom reservation using SMS
за авторством: Nurul Nadiah Binti Mohamed Hatta
Опубліковано: (2015)

The effect of process parameters on metal step coverage for aluminum (AI) by evaporation technique
за авторством: Noraishah Azman

Student attendance management system using RFID
за авторством: Nurul A'qilah Bt. Hasmizi
Опубліковано: (2015)

The Design of an Encryption Chip Using Vigenere Cipher/
за авторством: Tan, Shih Peng
Опубліковано: (2011)

Portable phone directory using altera devices/
за авторством: Vincent, Tiong Kwong
Опубліковано: (2011)

Portable phone directory using altera devices/
за авторством: Mohammad Isa Ahmad Azan
Опубліковано: (2011)

Simulation of 0.35 Um NMOS process based on UniMAP Cleanroom facilities
за авторством: Izny Atikah Ahmad Fahmi

Study of the effect of different gases parameter in dry etching process on etch rate profile
за авторством: Zaharah Mohamad

Smart arm robot using visual basic program
за авторством: Wee, Joo Ann

Design and implementation of a music box using FPGA
за авторством: Tan, Kian Yiak

Portable Food Menu Directory Using Altera Devices/
за авторством: Chi, Choong Tian
Опубліковано: (2011)

Design and implementation of a VGA display generator using FPGA
за авторством: Haslinda Hassan

Design a current mirror using body driven technique
за авторством: Siti Zawana Abdul Rani

RC car control using accelerometer sensor (RCC-A)
за авторством: Alif Aizat Azraie Bin Ahmad Jaelan
Опубліковано: (2015)

Ultrasonic range meter using PIC19F876
за авторством: Muhammad Shukran Ghanim

Fan control and monitoring system using visual basic program /
за авторством: Khairul Hisyam Hasan
Опубліковано: (2008)

Development door locking system via bluetooh using 8051
за авторством: Nesamalar Rukkumaran
Опубліковано: (2015)

Design and simulation of CMOS operational amplifier using mentor graphics tool
за авторством: Ramalu, Jegatheesan Sri