Synthesis and characterization of fe-al alloy with different sintering temperature

Synthesis and characterization of fe-al alloy with different sintering temperature

The aim of this final year project is to study the effect of the sintering temperature on the intermetallics properties. Beside it is to find the best sintering temperature for Fe-Al alloy system and to investigate physical and mechanical properties of the intermetallics produced. It is also to impr...

Ամբողջական նկարագրություն

Պահպանված է:

Մատենագիտական մանրամասներ
Հիմնական հեղինակ:	Maimum Razali (Հեղինակ)
Ձևաչափ:	Էլեկտրոնային Ծրագրային ապահովում Շտեմարան
Լեզու:	English
Խորագրեր:	Metallurgy.
Ցուցիչներ:	Ավելացրեք ցուցիչ Չկան պիտակներ, Եղեք առաջինը, ով նշում է այս գրառումը!

Նմանատիպ նյութեր

The anodizing of sintered mg/ca alloys/
: Norhadira Fatin Binti Wardi
Հրապարակվել է: (2016)

Study the different sintering temperature for Fe-11wt%Co/20wt%SiC composite an the composite will be fabricated via powder metallury method consists of mixing, compation and sintering processes
: Durairaj Ehambron

Effect of solution treatment temperature on the microstructure of fe-40ni-24cr alloy /
: Nuraliah Nazirah Mohd Hassan
Հրապարակվել է: (2016)

The effect of alloying elements in sintered-recycle steel compaction
: Mohd Fauzi Jaafar

Sintering atmosphere effect on AI-0.2mg alloy
: Muhammad Firdaus Rosli

Synthesis and characterization of glass fiber grade specimen using different source of Kaolin /
: Tan, Yan Jun
Հրապարակվել է: (2017)

Investigation of reaction temperature on the synthesis of graphene/
: Looi, Ee Heong
Հրապարակվել է: (2016)

Synthesis and Characterization of Biomimetic Titanium Dioxide/
: Nur Amirah Che Abdul Hamid
Հրապարակվել է: (2017)

Synthesis and characterization of biomimetic of Zinc Oxide /
: Nur Aziah Abdul Rahim
Հրապարակվել է: (2017)

Controlling the synthesis parameter during fe(OH)2 precipitation for goethite formation /
: Noraishah Binti Mohamed Noor
Հրապարակվել է: (2016)

Infuence of grain size on isothermal oxidation of fe-33ni-19cr alloy/
: Izzat Bin Mohd Noor
Հրապարակվել է: (2016)

Development of powder metallurgy route for production of novel fe-al intermetallics for high temperature applications /
: Fazimah Mat Noor
Հրապարակվել է: (2009)

Sintering behavior and microstructural characterization of aluminium copper powder compact (al-4.4cu-0.8si-0.5mgwt%) alloy prepared by powder metallurgy
: Looi, Mei Yen

Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
: Khairul Khusairi Kamaludin

Synthesis Anodised Al Oxide for DNA Detection /
: Nazurah Razlee
Հրապարակվել է: (2017)

Development of elemental powder metallurgy route for production of novel nanostructured FeAl intermetallics for high temperature applications /
Հրապարակվել է: (2010)

Synthesis and Characterization of Ternary Glass Composition Derived by sol-gel Method /
: Nik Nur Syahirah Nik Suhaimi
Հրապարակվել է: (2017)

Synthesis and Characterization of Alumina Nanoparticles by using a Sol Gel Method /
: Siti Nur Syakirah Binti Mohamad
Հրապարակվել է: (2017)

Synthesis and characterization of Cobalt/Calcium Carbonate catalyst in the production of Carbon Nanotubes/
: Ong, Huey Lin
Հրապարակվել է: (2017)

Development of Al-Ni-Cu Amorphous Alloy Powder /
: Norliyana Mustapar
Հրապարակվել է: (2017)

The effect of heat treatment on Fe-Ni/Sic composite
: Lai, Moon Yee

The effect of sintering temperature to the synthetic and natural hydroxyapatite (HA) added with 1% tin (IV) oxide (Sno2) as additive
: Nor Izurah Ismail

Microstructural and thermal studies of as-cast al-si-mg alloys
: Lokman Hakim Ibrahim

Effect of sintering condition on the properties of silicate ceramic materials
: Muhamad Hanifa Mohamad

Effect of temperature of electrolyte and anodizing voltage on the synthesis of cu2o nanostructures by anodizing/
: Chew, Jun Yuen
Հրապարակվել է: (2016)

Fabrication of Al-based Metallic Glasses by Mechanical Alloying and Hot Consolidation /
: Ng, Chun Ming
Հրապարակվել է: (2017)

Modified waste eggshell for the adsorption of FE2+ from aqueous solution/
: Yeo, Hui Sin
Հրապարակվել է: (2016)

Study On The Microstructure and Properties of Al-Zn Alloy Fabricated By Sand Casting Process /
: Syed Mohd Fikri Syed Sulaiman
Հրապարակվել է: (2017)

Effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr /
: Siti Aisyah Che Sakdun
Հրապարակվել է: (2017)

Synthesis and characterization of zirconia filled sol-gel derived bio-glass for load-bearing bone implant material /
: Mohd Khairul Azhar Bin Jusoh
Հրապարակվել է: (2016)

Synthesis and characterization of sol-gel derived bioglass composite filled tio2 for load bearing bone implant/
: Siti Rohani Binti Zainudin
Հրապարակվել է: (2016)

Synthesis and characterization of TiO2 USING SOL-GEL method deposited on Porous Cordierite for water treatment application/
: Ong, Yong Por
Հրապարակվել է: (2017)

Electroplating Copper on Aluminium Alloy/
: Nurhafizah Binti Ku Abdullah
Հրապարակվել է: (2016)

Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
: Izrul Azree Mohd Zaki

Microstructure development of Al-Mg-Si-Cu powder metallurgy under different addition of Sn
: Khairunnisa Omar

Synthesis and mechanical properties of alumina slip casting from aluminium tri- hydrate (aL(oh)3)/
: Nurfarahin Binti Mohd. Nordin
Հրապարակվել է: (2016)

The Effect Of Temperature On The Nitriding Of Aluminium /
: Nur Farhana Mohd Firdaus Ravi
Հրապարակվել է: (2017)

Synthesis of molecular imprinting polymer (mip) heparin/
: Tharrishini A/P Athmanathan
Հրապարակվել է: (2016)

Study of concentration of reaction gas on the synthesis of graphene /
: Choo, Yao Han
Հրապարակվել է: (2016)

Effect of dopant ionic size on room temperature thermoelectric properties of YbAl3M (M = Be, Si, Ga, In) /
: Qurratu Aini Aishah Binti Ahmad Fazil
Հրապարակվել է: (2016)