A study on surface roughness and morphology of Gallium Oxide Doped Ba0.5 Sr0.5 Ti03 thin film

A study on surface roughness and morphology of Gallium Oxide Doped Ba0.5 Sr0.5 Ti03 thin film

In this project look for developing barium gallium strontium titanate (BGST) thin film using chemical solution deposition (CSD) method as new material in ferroelectric fabrication

Saved in:

Bibliografiske detaljer
Hovedforfatter:	Fadrul Hisham Mohd Fauzi (Author)
Format:	Electronisk Software Database
Sprog:	English
Fag:	Microelectronics.
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Effect of annealing temperature and dopant concertration on the surface layer of indium doped Ba0.5Sr0.5Ti03 thin film
af: Noor Khairul Anuar Johari

Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)
af: Safinah Nor Bt Jusoh

Structural & electrical characterization of Ba(0.5)S(0.5)Tio3 thin films in effect annealing temperature
af: Ramadhan Adnan

Penghasilan katod komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2 O3) Samaria Terdop Seri Karbonat (SDCC) /
af: Mohamed Hakim Ahmad Shah
Udgivet: (2015)

Pengaruh suhu kalsium terhadap serbuk komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2)- samarium terdop seria karbonat (SDCC)/
af: Shaibool Afandi Ladim
Udgivet: (2016)

Analog circuit design techniques at 0.5℗V
Udgivet: (2007)

Analog circuit design techniques at 0.5v /
af: Chatterjee, Shouri
Udgivet: (2007)

Analog circuit design techniques at 0.5v /
af: Chatterjee, Shouri
Udgivet: (2007)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
af: Dyana Chahit
Udgivet: (2017)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
af: Dyana Chahit
Udgivet: (2017)

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
af: Muhammad Afiq Bin Mohd Razak
Udgivet: (2016)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
af: Azzlyn Zurain Zamri
Udgivet: (2019)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
af: Azzlyn Zurain Zamri
Udgivet: (2019)

Effect of post-reflow cooling rate and isothermal aging on imc formation between Sn-3.0Ag-0.5Cu-0.5Ni lead-free Solders and Enimag /
af: Zolhafizi Jaidi
Udgivet: (2016)

Harvard graphics 3.0/3.05.
Udgivet: (1994)

Harvard graphics 3.0/3.05.
Udgivet: (1994)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
af: Nurilham Zakiah Nazarudin
Udgivet: (2017)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
af: Nurilham Zakiah Nazarudin
Udgivet: (2017)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
af: Mohammed Ahmed AbdulWahab
Udgivet: (2016)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
af: Mohammed Ahmed AbdulWahab
Udgivet: (2016)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
af: Haziezol Helmi Mohd Yusof, et al.
Udgivet: (2017)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
af: Haziezol Helmi Mohd Yusof, et al.
Udgivet: (2017)

Load test of 0.5hp ac induction motor using coupling system /
af: Ting Siu Hui
Udgivet: (2011)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
af: Anayet Karim
Udgivet: (2014)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
af: Anayet Karim
Udgivet: (2014)

Middle School Get Me Out Osd 03/05
af: Patterson James

Middle School Get Me Out Osd 03/05
af: Patterson James

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
af: Yanawati Yahya
Udgivet: (2016)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
af: Yanawati Yahya
Udgivet: (2016)

Mengkaji corak semburan yang dihasilkan oleh nozzle rekabentuk mudah dan komplek terhadap perubahan tekanan (0.5, 1.0, 1.5, 2.0, 2.5 dan 3.0 bar) /
af: Mohd Lutfi Suhaini
Udgivet: (2015)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
af: Josphene J. Endam
Udgivet: (2005)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
af: Nor Shafiqin Sahrifuddin
Udgivet: (2012)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
af: Nor Shafiqin Sahrifuddin
Udgivet: (2012)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
af: Josphene J. Endam
Udgivet: (2005)

Psychology 04/05
Udgivet: (2004)

Health 04/05
Udgivet: (2004)

Psychology 04/05
Udgivet: (2004)

Health 04/05
Udgivet: (2004)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
af: Khairul Nazri Taha

Marketing 05/06 : annual editions /
Udgivet: (2005)