Study of the temperature effect on thickness and surface roughness of Si02

Study of the temperature effect on thickness and surface roughness of Si02

The aims of this final year project is to study the oxidation temperature effect over the oxidation process, to study the reason why the temperature 1100℗ðC which is commonly used for the oxidation process, and to study and find the suitable time to get the optimum result for the oxidation process....

Disgrifiad llawn

Wedi'i Gadw mewn:

Manylion Llyfryddiaeth
Prif Awdur:	Mohd Azdi Asis (Awdur)
Fformat:	Electronig Meddalwedd Cronfa ddata
Iaith:	English
Pynciau:	Microelectronics.
Tagiau:	Ychwanegu Tag Dim Tagiau, Byddwch y cyntaf i dagio'r cofnod hwn!

Eitemau Tebyg

Theoretical study, simulation & fabrication on dry oxidation in terms of Si02 layer thinckness, resistivity & surface roughness
gan: Mohd Adam Alias

Method of measurement of LTCC metallization thickness
gan: Lee, Soo Khiang

Study of the thickness of the silicon dioxide on wafer using dry and wet oxidation method
gan: Mohamad Fadzli Ali

A study on surface roughness and morphology of Gallium Oxide Doped Ba0.5 Sr0.5 Ti03 thin film
gan: Fadrul Hisham Mohd Fauzi

Temperature controller with a digital temperature display
gan: Mohd Hafidz Rosli

The effect of annealing temperature and dopant concentration on the surface layer of vanadium doped barium strontium titanate (BVST) thin film
gan: Siti Norhaida Abdul Rahman

Effect of diffusion coefficient and junction depth on variation of temperature and energy
gan: Nur Ruzana Bohari

Effect of annealing temperature and dopant concertration on the surface layer of indium doped Ba0.5Sr0.5Ti03 thin film
gan: Noor Khairul Anuar Johari

The effect of power density on the surface layer of amorphous thin film
gan: Ahmad Fadzil Izaharuddin

Single cyrstal SiC capacitive pressure sensor
gan: Ruhaizi Mohd Hatta

Microfluidic poly-si electrodes capacitor (fabricate & testing)
gan: Esmal Fhadly Abd Malek

Study the effect of environmental noise on infrared Tx-Rx circuit signals
gan: Mohd Zaihan Ibrahim

Structural & electrical characterization of Ba(0.5)S(0.5)Tio3 thin films in effect annealing temperature
gan: Ramadhan Adnan

Design and Analysis of a Wireless Temperature Monitoring System/
gan: Teoh, Wei Boon
Cyhoeddwyd: (2011)

The study of the effect of MOS transistor scaling on the critical device parameters
gan: Zazurina Abd Rahman

Simulation, fabrication and electrical characterization of p-Si capacitor design structure
gan: Cherly, She Siew Yuet

Improvement of SiGe HBT design and technology performance using device simulation
gan: Nurradila Rahman

Characterization of electroless under bump metallury for AlSi bond pad composition
gan: Norahmad Barzrul Basaruddin

Study of the effect of different gases parameter in dry etching process on etch rate profile
gan: Zaharah Mohamad

Study and design infrared beacon for the blind
gan: Mohd Fadzlie Rasit

The study on the effect of varing dopant concentration and diffusion time in the design of silicon avalanche diode with minimum VBR of 120+-20%
gan: Yip, Siew Ling

Study the effect of bird's beak on fully recessed locos and poly buffered locos using 2 different pad oxide
gan: Hafizal Hafiz Sarjoni

Effect of different dielectric materials for ultrathin oxide
gan: Zarimawaty Zailan

Simulation on effect of different types of channel/ drain engineering structure on MOS device performance
gan: Norazlina Mohd Amin

Study and design the current mirror using bulk-driven technique for low voltage analog
gan: Mohd Faidzul Bukhari Mohd Kanafiah

Study on diffusivity of gallium dopant in silicon using spin on dopant (SOD) technique
gan: Mohd Rosydi Zakaria

Study and improvement of UniMAP shower room
gan: Lau, Iyu Pin

Polysilicon process development - the effect of pecvd process parameters on the film characteristics
gan: Mujahidun Mashuri

Study the basic infrared tx-rx circuit design for robot
gan: Nik Ahmad Faiz Abdul Jamel

The effect of process parameters on metal step coverage for aluminum (AI) by evaporation technique
gan: Noraishah Azman

Study of semi-recessed LOCOS for quasi-nanoscale CMOS devise isolation
gan: Mohamad Idzham Abd Sani

Coherent effect on LOCOS and STI technique for 0.18℗æm CMOS technology using taurus workbench
gan: Wan Shafie Wan Sulaiman

Study in design of 32 x 4 bit static random access memory (SRAM)
gan: Nor Bashariah Muhamad Bakhtiar

A Study of Proper Integrated Circuit (IC) Layout Techniques for a Parallel Adder/
gan: Kau, Zee Shuang
Cyhoeddwyd: (2011)

Study of aspect ratio performance on silicon oxide etching using profiler meter, AFM and SEM
gan: Nur Syuhada Md. Desa

A green house study of a capacitive soil moisture sensor for loamy clay soil
gan: Nur Umirah Binti Johari
Cyhoeddwyd: (2015)

Study of acceleratin voltage influence the conical structure during electron beam induced depasition (EBID)
gan: Muhammad Afif Abdul Rahman

Study of deposition time influence the conical structure during electron beam induced deposition (EBID)
gan: Mohamad Shahrizal Md Ilias

Future trends in microelectronics : frontiers and innovations /
Cyhoeddwyd: (2013)

Microelectronics /
gan: Razavi, Behzad
Cyhoeddwyd: (2015)