Analysis of binary aluminium-tin products with varying compositions and optimum flowability, tensile strength and hardness
This final year project is about investigation, in the first stage aluminium tin was melt in electric furnace and the melting was done at 550 ℗ʻC as it was to make sure that resulted in better wettability of aluminium tin particles and reduced entrapment of gases in the cast. The second part of this...
Đã lưu trong:
| Tác giả chính: | |
|---|---|
| Định dạng: | Điện tử Phần mềm Cơ sở dữ liệu |
| Ngôn ngữ: | English |
| Những chủ đề: | |
| Các nhãn: |
Thêm thẻ
Không có thẻ, Là người đầu tiên thẻ bản ghi này!
|
| Tóm tắt: | This final year project is about investigation, in the first stage aluminium tin was melt in electric furnace and the melting was done at 550 ℗ʻC as it was to make sure that resulted in better wettability of aluminium tin particles and reduced entrapment of gases in the cast. The second part of this investigation involved evaluation of microstructure and properties of this aluminium in as cast and heat treated conditions. |
|---|---|
| Mô tả sách: | Final Year Project |
| Mô tả vật lý: | 1 CD-ROM 4 3/4 in. |