Analysis of binary aluminium-tin products with varying compositions and optimum flowability, tensile strength and hardness

Analysis of binary aluminium-tin products with varying compositions and optimum flowability, tensile strength and hardness

This final year project is about investigation, in the first stage aluminium tin was melt in electric furnace and the melting was done at 550 ℗ʻC as it was to make sure that resulted in better wettability of aluminium tin particles and reduced entrapment of gases in the cast. The second part of this...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Hovedforfatter:	Mohammad Khairol Kamal (Author)
Format:	Electronisk Software Database
Sprog:	English
Fag:	Metallurgy.
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Analysis of binary aluminium-magnesium products with varying compositions and optimum flowability, tensile strength and hardness
af: Surianis Mat Salleh

Analyze the quality of tin-aluminium binary alloy products concerning of its flowability, tensile strength and hardness using various types of moulds
af: Ahmad Zahrul Husaini Ahmad Helmy

Analyze the quality of magnesium-aluminum binary alloy products concerning of its flowability, tensile strength and hardness with various types of moulds
af: Mohamad Sohaifol Hj. Soid

A Study on Hard Anodzing of Aluminium /
af: Ooi, Say Haan
Udgivet: (2017)

Study of fabrication AI-Tin slag composite by powder metallurgy method
af: Muhammad Syazwan Abdul Manan

Tensile, morphological and properties of soy protein isolate/nanohalloysite composite films /
af: Tan, Boon Sheong
Udgivet: (2016)

A study of dissimilar welding between mild steel and stainless steel on hardness and tensile shear test for gas tungsten arc welding (GTAW)
af: Ahmad Safwan Salim

The thermal properties of aluminium hydroxide as filler in recycled pp composite /
af: Nurul Hazirah Binti A.Halim
Udgivet: (2016)

Study on differentiation of tensile and ultrasonic modulus of highway guardrail
af: Nur Khairiatun Nisa Mokhtar

Study On The Effect Different Weight Percentage Of Alumina On Aluminium Metal Matrix Composite /
af: Soon, Chia Hui
Udgivet: (2017)

The Effect Of Temperature On The Nitriding Of Aluminium /
af: Nur Farhana Mohd Firdaus Ravi
Udgivet: (2017)

Electroplating Copper on Aluminium Alloy/
af: Nurhafizah Binti Ku Abdullah
Udgivet: (2016)

Tensile and thermal properties of tapioca starch/ sugarcane bagasse cellulose biocomposite films/
af: Wart a/p ehing
Udgivet: (2016)

The effect of varied welding currents and cycles on thin sheet mild steel with heat treatment process for resistance spot weld
af: Mohamed Faisol Mohamed Nor

The effect of various Wt% of polypropylene on the hardness and anti-friction behavior of al-filled polypropylene./
af: Engku Zamir Affandi bin Engku Hamadi
Udgivet: (2016)

The effect of sintering temperature to the synthetic and natural hydroxyapatite (HA) added with 1% tin (IV) oxide (Sno2) as additive
af: Nor Izurah Ismail

Modelling aging kinetics of aluminium alloy aa2124/
af: Tiaw, Wei Ping
Udgivet: (2016)

Modelling aging kinetics of aluminium alloy AA2124/
af: Mohamad Zulhilmi Bin Md Nasir
Udgivet: (2016)

Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
af: Izrul Azree Mohd Zaki

Coefficient of thermal expansion (Cte) study in metal matrix composite of cusic vs alsic/
af: Mohammad Nur Arif Bin Mohammad Nizam
Udgivet: (2016)

Mechanical And Thermal Performance Of Lightweight Geopolymers Foamed Using Aluminium Powder/
af: Mohamed Aliff Izham Mohamed Zakhari
Udgivet: (2017)

Effects of ultrasonication process to morphology and tear strength of thermoplastic starch/cellulose biocomposite/
af: V. Thiviya A/P P.Vijayarajah
Udgivet: (2016)

Effect of Ball to Powder Ratio and Media Density on Fine Grinding and Mechanical Activation of Hematite Ores in Planetary Mill /
af: Siti Izatul Hawa Khairol Salleh
Udgivet: (2017)

Optimisation of anodising parameter with oxalic acid for the formation of anodic aluminium oxide by using taguchi methods /
af: Nor Syammimi Binti Abu Hasan
Udgivet: (2016)

The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
af: Ahmad Azid Tahar Ahmad Latiffi

Study on properties of molybdenum filled polypropylene composites
af: Junizah Abdul Rashid

Properties of chitosan/halloysite nanotubes composite films /
af: Syahira Adila Binti Mat Sulaiman
Udgivet: (2016)

Synthesis and mechanical properties of alumina slip casting from aluminium tri- hydrate (aL(oh)3)/
af: Nurfarahin Binti Mohd. Nordin
Udgivet: (2016)

Properties of CNTs/Calcium Carbonate Filled Polymer composites /
af: Siti Maisarah Suhaimi
Udgivet: (2017)

Rheology behaviour of low density polyethylene / clay composite
af: Rokiah Rahamad

The effect of heat treatment on Fe-Ni/Sic composite
af: Lai, Moon Yee

Preliminary study on bagasse fiber with polystyrene as polymer composite
af: Liyana Jamaludin

Buiding of composite system FPR wing using prepreg
af: Siti Noorkhartina Binti Ishak

Properties of carbon nanotubes and calcium carbonates in polymer composites/
af: Noor Azwa Binti Mohd Noor
Udgivet: (2016)

Degradation study of unsaturated polyester/citronella fibre composite/
af: Hasnor Hafiza Binti Hussin
Udgivet: (2016)

Effect of Mixing Parameter on Epoxy Composites: Mechanical and Microscopy Analysis /
af: Ng, Soo Li
Udgivet: (2017)

Properties of pulp fiber filled high density polyethylene composites
af: Azmel Hakim Zainol Abidin

Study on properties of sugarcane bagasse fiber filled polypropylene composites
af: Nur Sheli Akma Ramli

Preparation of rice straw-waste tire dust composite board
af: Muhammad Syafiq Azmi

Mechanical properties of kenaf and calcium carbonate with unsaturated polyester composites /
af: Siti Nur Ain Binti Che Hussain
Udgivet: (2016)