Effect of current stressing on intermetallic formation and mechanical properties of lead free sac solder and sac/activated carbon composite solder joint/

Effect of current stressing on intermetallic formation and mechanical properties of lead free sac solder and sac/activated carbon composite solder joint/

This study will investigate the effects of current stressing on intermetallic compound growth and the mechanical properties of lead free SAC and SAC/Activated carbon solder composite solder joint for certain current stressing time.. Soldered wires will be set up on the power supply with current 0.20...

पूर्ण विवरण

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखक:	Syahirah Alyaa Yahya (लेखक)
स्वरूप:	थीसिस सॉफ्टवेयर ई-पुस्तक
भाषा:	English
प्रकाशित:	Perlis, Malaysia School of Materials Engineering, University Malaysia Perlis 2016
विषय:	Metallurgy.
टैग :	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

The Effect of Thermal Aging on Intermetallic Compound Growth of SAC/Activated Carbon(AC) Composite Solder /
द्वारा: Norhafifah Binti Zainal Azlin
प्रकाशित: (2016)

Effect of corrosion in acidic solution to the phase and microstructure of sac305 solder /
द्वारा: Khoo, Cheng Hao
प्रकाशित: (2016)

Aging effect of sn-ag-cu lead free solder
द्वारा: Mohd Jaffry Radzi

The effect of multiple reflow soldering for SAC305 and SAC405 on lead-free solder /
द्वारा: Noraini Abdul Kadir
प्रकाशित: (2015)

Effect of Zinc Additions on SN-0.7CU-0.05NI Lead Free Solder Alloy /
द्वारा: Nurul Ashikin Saleh
प्रकाशित: (2017)

The effect of polarization scan rate on the corrosion properties of sac305 in acidic solution /
द्वारा: Adelyn, Ooi Kim Kee
प्रकाशित: (2016)

Effect of corrosion in acidic solution to the phase and microstructure of sn-cu solder/
द्वारा: Gan, Zhi Wan
प्रकाशित: (2016)

Effect of polarization scan rate on corrosion in acidic solution to the properties of Sn-Cu solder/
द्वारा: Low, Suk Yen
प्रकाशित: (2016)

Intermetallic formation between lead free solder and copper substrate /
द्वारा: Muhammad Aliff Md Ali
प्रकाशित: (2014)

Properties of carbon nanotubes and calcium carbonates in polymer composites/
द्वारा: Noor Azwa Binti Mohd Noor
प्रकाशित: (2016)

The effect of thermal aging on the oxidation of solder joint using SAC305 /
द्वारा: Izzat Syazani Abdul Latif
प्रकाशित: (2018)

The effect of thermal aging on the oxidation of solder joint using SAC305 /
द्वारा: Izzat Syazani Abdul Latif
प्रकाशित: (2018)

The effect of thermal aging on the oxidation of solder joint using SAC305 /
द्वारा: Izzat Syazani Abdul Latif
प्रकाशित: (2018)

The effect of thermal aging on the oxidation of solder joint using SAC305 /
द्वारा: Izzat Syazani Abdul Latif
प्रकाशित: (2018)

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
द्वारा: Muhammad Afiq Bin Mohd Razak
प्रकाशित: (2016)

Synthesis and characterization of Cobalt/Calcium Carbonate catalyst in the production of Carbon Nanotubes/
द्वारा: Ong, Huey Lin
प्रकाशित: (2017)

Development od SiC reinforced SnCu and SAC based lead-free solder composite via powder metallurgy route / Zawawi bin Mahim
द्वारा: Zawawi Mahim
प्रकाशित: (2018)

Synthesis and Characterization of Lead Free SnCu & SnCu/SiC composite solder paste /
द्वारा: Nur Syahirah Mohamad Zaimi
प्रकाशित: (2017)

Lead-free soldering /
प्रकाशित: (2007)

Lead-free soldering
प्रकाशित: (2007)

Lead-free soldering
प्रकाशित: (2007)

Lead-free soldering
प्रकाशित: (2007)

Influence of H2S04 solution on formation of porous AAO thin film
द्वारा: Nornani Md Aznan

Influence of H2S04 solution on formation of forous AAO thin film
द्वारा: Puteri Normiyani Abu Hassan

Controlling the synthesis parameter during fe(OH)2 precipitation for goethite formation /
द्वारा: Noraishah Binti Mohamed Noor
प्रकाशित: (2016)

Fabrication of SAC107 and Sn-0.7Cu lead free composite solder reinforced with Si3N4 via powder metallurgy route /
द्वारा: Norhayanti Mohd Nasir
प्रकाशित: (2017)

Development of powder metallurgy route for production of novel fe-al intermetallics for high temperature applications /
द्वारा: Fazimah Mat Noor
प्रकाशित: (2009)

Development od SiC reinforced SnCu and SAC based lead-free solder composite via powder metallurgy route / \c Zawawi bin Mahim
द्वारा: Zawawi Mahim
प्रकाशित: (2018)

Optimisation of anodising parameter with oxalic acid for the formation of anodic aluminium oxide by using taguchi methods /
द्वारा: Nor Syammimi Binti Abu Hasan
प्रकाशित: (2016)

Properties of CNTs/Calcium Carbonate Filled Polymer composites /
द्वारा: Siti Maisarah Suhaimi
प्रकाशित: (2017)

Development of elemental powder metallurgy route for production of novel nanostructured FeAl intermetallics for high temperature applications /
प्रकाशित: (2010)

Understanding the effect of oxidation on the interfacial diffusion of solder joint using SAC 305 /
द्वारा: Muhd Abd Azim Al Hafiz Shahri
प्रकाशित: (2019)

Understanding the effect of oxidation on the interfacial diffusion of solder joint using SAC 305 /
द्वारा: Muhd Abd Azim Al Hafiz Shahri
प्रकाशित: (2019)

Agricultural residues as precursors for activated carbon production (rice husk)
द्वारा: Nur Hasyimah Mohd Kamaluddin

Agricultural residues as precursors for activated carbon production (coconut waste) /
द्वारा: Zatil Alyani Mohd Amin
प्रकाशित: (2008)

Mechanical properties of kenaf and calcium carbonate with unsaturated polyester composites /
द्वारा: Siti Nur Ain Binti Che Hussain
प्रकाशित: (2016)

Preparation and characterization of ldpe/tps blend filled with calcium carbonate /
द्वारा: Anis Adila Binti Ab Halim
प्रकाशित: (2016)

The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
द्वारा: Ahmad Azid Tahar Ahmad Latiffi

Study effect of welding current on mechanical properties of galvanized steel sheets in resistance spotwelding
द्वारा: Muhammad Rifki Ismail

Influence of phosphoric acid (H3P04) solution on formation of porous anodic aluminum oxide (AAO) thin film
द्वारा: Norul Fatihah Abdul Hadi