Effect of admixing CU and sintering parameters on the densification and mechanical properties of microwave sintered 316L stainless steel /
In this research, researching the effect of Cu to the sintering parameter on the densification and mechanical properties of using microwave sinterd the 316L stainless steel. The variable parameter in this research are the sintering temperature, heating rate and the enviroment when sintering. The env...
Đã lưu trong:
| Tác giả chính: | |
|---|---|
| Định dạng: | Luận văn Phần mềm eBook |
| Ngôn ngữ: | English |
| Được phát hành: |
Perlis, Malaysia
School of Manufacturing Engineering, University Malaysia Perlis
2010
|
| Những chủ đề: | |
| Các nhãn: |
Thêm thẻ
Không có thẻ, Là người đầu tiên thẻ bản ghi này!
|
| Tóm tắt: | In this research, researching the effect of Cu to the sintering parameter on the densification and mechanical properties of using microwave sinterd the 316L stainless steel. The variable parameter in this research are the sintering temperature, heating rate and the enviroment when sintering. The enviroment of sintering either is gas nitrogen or gases argon. The sample will sintering in the 2.45GHz microwave sintering furnace. The randomized block is use to analysis the best parameter to the sintering process on same material. |
|---|---|
| Mô tả vật lý: | 1 CD-ROM 12 cm |
| Thư mục: | Includes bibliographical references (page 45-46) |