The properties of 3D printed material fabricated using fused filament fabrication (FFF) /

The properties of 3D printed material fabricated using fused filament fabrication (FFF) /

Показати інші версії (3)

Збережено в:

Бібліографічні деталі
Автор:	Farhah Nadiah Mustapha (Автор)
Формат:	Програмне забезпечення eКнига
Мова:	English
Опубліковано:	2018.
Предмети:	Materials > Mechanical properties. Three-dimensional printing.
Теги:	Додати тег Немає тегів, Будьте першим, хто поставить тег для цього запису!

Схожі ресурси

The properties of 3D printed material fabricated using fused filament fabrication (FFF) /
за авторством: Farhah Nadiah Mustapha
Опубліковано: (2018)

The properties of 3D printed material fabricated using fused filament fabrication (FFF) /
за авторством: Farhah Nadiah Mustapha
Опубліковано: (2018)

The properties of 3D printed material fabricated using fused filament fabrication (FFF) /
за авторством: Farhah Nadiah Mustapha
Опубліковано: (2018)

Experimental study on mechanical behavior in 3D printed part using Fused Deposition Modelling (FDM) method : the oil palm fiber reinforced thermoplastic filament as raw material /
за авторством: Izzati Fatin Alis
Опубліковано: (2018)

Experimental study on mechanical behavior in 3D printed part using Fused Deposition Modelling (FDM) method : the oil palm fiber reinforced thermoplastic filament as raw material /
за авторством: Izzati Fatin Alis
Опубліковано: (2018)

Mechanical properties of 3D printed material using fused filament fabrication technique /
за авторством: Khairul Effendi Ismail
Опубліковано: (2017)

Mechanical properties of 3D printed material using fused filament fabrication technique /
за авторством: Khairul Effendi Ismail
Опубліковано: (2017)

3D printing technology, applications, and selection
за авторством: Noorani, Rafiq
Опубліковано: (2018)

3D printing technology, applications, and selection
за авторством: Noorani, Rafiq
Опубліковано: (2018)

Mechanical properties investigation on PLA and ABS materials for geospatial topology product printed by rapid prototyping method /
за авторством: Zarif Hasif Termiti
Опубліковано: (2019)

Mechanical properties investigation on PLA and ABS materials for geospatial topology product printed by rapid prototyping method /
за авторством: Zarif Hasif Termiti
Опубліковано: (2019)

Improvement on mechanical properties and study of manufacturability of printed part fabricated via open source 3D printer /
за авторством: Siti Nur Humaira Mazlan
Опубліковано: (2018)

Improvement on mechanical properties and study of manufacturability of printed part fabricated via open source 3D printer /
за авторством: Siti Nur Humaira Mazlan
Опубліковано: (2018)

Study on recycle material on 3D printer extruder filament /
за авторством: Nur Hazwani Husna Halizaini
Опубліковано: (2018)

Study on recycle material on 3D printer extruder filament /
за авторством: Nur Hazwani Husna Halizaini
Опубліковано: (2018)

Investigation on mechanical and thermal properties of 100% recycled 3D printed ABS material /
за авторством: Anis Hazirah Samat
Опубліковано: (2019)

Investigation on mechanical and thermal properties of 100% recycled 3D printed ABS material /
за авторством: Anis Hazirah Samat
Опубліковано: (2019)

Layer adhesion investigation of 3D printer platform /
за авторством: Nornarieyza Rosli
Опубліковано: (2017)

Layer adhesion investigation of 3D printer platform /
за авторством: Nornarieyza Rosli
Опубліковано: (2017)

Nanomaterials for 2D and 3D printing
Опубліковано: (2017)

Nanomaterials for 2D and 3D printing
Опубліковано: (2017)

Study on the performance chraracteristics of 3D printed centrifugal pump /
за авторством: Mohd Syafiq Firdaus Mohd Ridzwan
Опубліковано: (2018)

Study on the performance chraracteristics of 3D printed centrifugal pump /
за авторством: Mohd Syafiq Firdaus Mohd Ridzwan
Опубліковано: (2018)

Development of composite using plastic and natural fiber for 3D printing /
за авторством: Amir Farhan Ahmad
Опубліковано: (2018)

Development of composite using plastic and natural fiber for 3D printing /
за авторством: Amir Farhan Ahmad
Опубліковано: (2018)

Consolidation characteristics of parts fabricated via open 3D metal printing utilizing a new integrated plasma deposition technique /
за авторством: Mohd Rizal Alkahari, Associate Professor Ir. Dr, та інші
Опубліковано: (2019)

Consolidation characteristics of parts fabricated via open 3D metal printing utilizing a new integrated plasma deposition technique /
за авторством: Mohd Rizal Alkahari, Associate Professor Ir. Dr, та інші
Опубліковано: (2019)

3D printing
за авторством: Horne, Richard, та інші
Опубліковано: (2017)

3D printing
за авторством: Horne, Richard, та інші
Опубліковано: (2017)

Study the influnce of aceton to improve surface finish of 3D printed part for ABS and PLA material /
за авторством: Noor Nabila Natasya Rosli
Опубліковано: (2017)

Study the influnce of aceton to improve surface finish of 3D printed part for ABS and PLA material /
за авторством: Noor Nabila Natasya Rosli
Опубліковано: (2017)

Wear behaviour of 3D printed part of carbon fibre reinforced ABS composite /
за авторством: Mohamad Safei Sani
Опубліковано: (2017)

Wear behaviour of 3D printed part of carbon fibre reinforced ABS composite /
за авторством: Mohamad Safei Sani
Опубліковано: (2017)

Design and development of sustainable filament extruder for 3D printer /
за авторством: Leong, Yong Lim
Опубліковано: (2015)

Design and development of sustainable filament extruder for 3D printer /
за авторством: Leong, Yong Lim
Опубліковано: (2015)

Design and analysis of pressing mechanism for imroving 3D printing process /
за авторством: Muhammad Hafiz Helmi Ibrahim
Опубліковано: (2019)

Design and analysis of pressing mechanism for imroving 3D printing process /
за авторством: Muhammad Hafiz Helmi Ibrahim
Опубліковано: (2019)

A study on extrusion process of FLD-25 3D filament machine and optimization of temperature parameter for filament production /
за авторством: Siti Nurmariah Saupi
Опубліковано: (2019)

A study on extrusion process of FLD-25 3D filament machine and optimization of temperature parameter for filament production /
за авторством: Siti Nurmariah Saupi
Опубліковано: (2019)

Design and development of 3D printed shoe midsole /
за авторством: Choo, Shen Yew
Опубліковано: (2018)