A study on the performance of WC-Co uncoated when endmill inconel 718 in dry condition /

A study on the performance of WC-Co uncoated when endmill inconel 718 in dry condition /

Show other versions (1)

Saved in:

Bibliografiske detaljer
Hovedforfatter:	Mohd Noor Hairil Mohd Yusof (Author)
Institution som forfatter:	Kolej Universiti Teknologi Tun Hussein Onn. Fakulti Kejuruteraan Mekanikal dan Pembuatan
Format:	Thesis Bog
Sprog:	English
Udgivet:	Batu Pahat : Kolej Universiti Teknologi Tun Hussein Onn, 2006.
Fag:	Metal-cutting tools. Tungsten carbide. Inconel.
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

A study on the performance of WC-Co uncoated when endmill inconel 718 in dry condition /
af: Mohd Noor Hairil Mohd Yusof
Udgivet: (2006)

Milling of inconel 718 by using uncoated WC-Co insert in the dry condition /
af: Mohd Aratah Abdul Latif
Udgivet: (2006)

Study of vibration and surface roughness in milling inconel 718 with TiAIN coated in dry condition /
af: Mohd Affendi Kamsin
Udgivet: (2006)

Investigation of surface integrity when using micro EDM inconel 718 /
af: Abu Al Itqan Ismail
Udgivet: (2007)

Milling of inconel 718 by using uncoated WC-Co insert in the dry condition /
af: Mohd Aratah Abdul Latif
Udgivet: (2006)

Investigation on machining microholes on inconel 718 by EDM /
af: Muhammad Danial Muhammad Masri
Udgivet: (2006)

Performance of WC-Co tools when milling titanium alloys (Ti-6A1-4V) /
af: Nor Zalfarita Muhammad Nor
Udgivet: (2006)

Kajian kekasaran permukaan terhadap karbida tungsten selepas pemesinan EDM /
af: Hussein Md. Zain
Udgivet: (2003)

Micro-hole drilling edm of inconel 718 by using copper tungsten elecrode /
af: Said Ahmad
Udgivet: (2006)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy /
af: Erween Abd. Rahim
Udgivet: (2005)

Analysis of cutting force effect when milling titanium alloy (Ti-6A1-4V) using uncoated and coated carbide insert /
af: Mohammad Zainal Akmal Ismail
Udgivet: (2006)

Chip formation when milling inconel 718 /
af: Wan Basriyah Abdul Rahman
Udgivet: (2014)

The effect of TiAIN and TiN coating when milling inconel 718/
af: Roslan Aziz
Udgivet: (2010)

Study on vibration and chip formation in milling of inconel 718 /
af: Amir Syafiq Kamarunzaman
Udgivet: (2008)

Study effect of chip and vibration when milling inconel 718 using TiN and TiAIN coated carbide /
af: Muhamad Aimran Suhaimi
Udgivet: (2010)

Study on tool wear and surface roughness in end milling of inconel 718 coated carbide inserts /
af: Ahmad Nazwan Mhd Sarbini
Udgivet: (2008)

Study of minimum quantity lubriant (MQL) in machining inconel 718 using high speed machining by Taguchi Method /
af: Edwin Anand Raj Albert Amal Dass
Udgivet: (2011)

A study of chip formation and cutting force on end milling superalloy inconel 718 using coated carbide /
af: Azwan Abdul Ghani
Udgivet: (2014)

Study of vibration and surface roughness in milling inconel 718 with TiAIN coated in dry condition /
af: Mohd Affendi Kamsin
Udgivet: (2006)

Surface roughness of inconel 718 after end miling under flooded lubrication
af: Aishah Jamaluddin
Udgivet: (2014)

Surface roughness of inconel 718 after end miling under flooded lubrication
af: Aishah Jamaluddin
Udgivet: (2014)

Evaluation of wear behaviour of nickel tungsten carbide (Ni-WC) electrodeposited with different tungsten carbide (WC) concentration and current density /
af: Muhamad Adeeb Reezan Sukkeri
Udgivet: (2017)

Cantuman SiC terhadap inconel 718 menggunakan bahan penambah BCu-1 & BAg-2a dengan teknik meloyang /
af: Muhammad Shehabulmillah, Mehamad Nasir
Udgivet: (2008)

Experimental study on the effect of new multiflute endmill tool on the surface intergrity and chip formation when machining hardened material.
af: Angela Chiu Shin Mei
Udgivet: (2018)

Influence of deposition parameter to wear behaviour of tungsten carbide-nickel (WC-NI) high velocity oxyfuel (HVOF) coating /
af: Mohd Affifudin Abdul Patar
Udgivet: (2018)

Study of cutting force and tool wear in end milling inconel 718 with coated carbride inserts in dry condition /
af: Ashrul Riezal Asbar
Udgivet: (2006)

Modeling of surface roughness using PVD coated and uncoated tungsten carbide inserts in milling D2 steel /
af: Mohd Fakhrurrazi Ayub
Udgivet: (2014)

Modeling of surface roughness using PVD coated and uncoated tungsten carbide inserts in milling D2 steel /
af: Mohd Fakhrurrazi Ayub
Udgivet: (2014)

Performance of wc-co tools when milling titanium alloys (Ti-6AI-4V) /
af: Mohd Faizal Azmi
Udgivet: (2006)

Investigation of surface integrity when using micro EDM inconel 718 /
af: Abu Al Itqan Ismail
Udgivet: (2007)

Kajian terhadap kekerasan mikro tungsten karbida (WC) selepas pemesinan EDM /
af: Norasyidah Mohd Noh
Udgivet: (2004)

Performance of WC-Co tools when milling titanium alloys (Ti-6A1-4V) /
af: Nor Zalfarita Muhammad Nor
Udgivet: (2006)

Investigation on machining microholes on inconel 718 by EDM /
af: Muhammad Danial Muhammad Masri
Udgivet: (2006)

Effect on TiN coating on surface integrity of elelctrical discharge machined tool steel /
af: Khairi Azhar Hashim
Udgivet: (2010)

Behavior of the minimum quantity lubricant (MQL) when milling inconel 718 material /
af: S Kanna a/l Subramaniyan
Udgivet: (2008)

Tool performance of uncoated tungsten carbide insert during turning Ti-6AI-4V under dry and nanofluid condition /
af: Muhammad Yusri Shafi'e
Udgivet: (2017)

Tool performance of uncoated tungsten carbide insert during turning Ti-6AI-4V under dry and nanofluid condition /
af: Muhammad Yusri Shafi'e
Udgivet: (2017)

Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy /
af: Erween Abd. Rahim
Udgivet: (2005)

A comparative study on wear and corrosion behaviour of tungsten carbide-nickel (Wc-Ni) and tungten carbide-cobalt (Wc-Co) high velocity oxy-fuel (HVOF) for carbon steel blade/
af: Noor Aqilah Ahmad
Udgivet: (2017)

Kajian kesan-kesan parameter EDM terhadap kadar pembuangan bahan (MRR) bagi logam tungsten carbide /
af: Feroz Shah Zainordin
Udgivet: (2003)