Evaluation of kenaf fibre for the development of kenaf/polyester hybrid yarn. /

Evaluation of kenaf fibre for the development of kenaf/polyester hybrid yarn. /

Показати інші версії (1)

Збережено в:

Бібліографічні деталі
Автор:	Anis Amirah Nor Anuwar (Автор)
Співавтор:	Universiti Tun Hussein Onn Malaysia. Fakulti Teknologi Kejuruteraan
Формат:	Дисертація Книга
Мова:	English
Опубліковано:	Batu Pahat : Universiti Tun Hussein Onn Malaysia , 2019.
Предмети:	.
Теги:	Додати тег Немає тегів, Будьте першим, хто поставить тег для цього запису!

Схожі ресурси

Evaluation of kenaf fibre for the development of kenaf/polyester hybrid yarn. /
за авторством: Anis Amirah Nor Anuwar
Опубліковано: (2019)

Evaluation of kenaf/polyester hybrid yarn subjected to different spinning parameter. /
за авторством: Syafikah Che Ismail
Опубліковано: (2019)

Study on mechanical properties of epoxy resin reinforced by coir fibre /
за авторством: Muhammad Wafiuddin Abdul Halim
Опубліковано: (2019)

Study on sound absorption properties of rubber wood fibre reinforced with epoxy resin /
за авторством: Muhammad Hanafi Abd Rahman
Опубліковано: (2019)

A study of sound and vibration transmissibility of rigid polyurethane composite foam doped with areca fibre in slab railway application. /
за авторством: Nabilah Kassim
Опубліковано: (2019)

Evaluation of acmv chiller performance towards energy efficiency: case study in PTTA and technology complex, UTHM /
за авторством: Muhammad Syafiq Selamat
Опубліковано: (2019)

The study of pigment based on pandanus amaryllifolius for superhydrophobic coating in cotton-polyester blended in textile applications. /
за авторством: Chew, Gin Yan
Опубліковано: (2018)

Development of motorised monoplane wings for educational kit /
за авторством: Aiman Nur Hakim Ahmad Rizal
Опубліковано: (2019)

Numerical investigation of diffuser effectiveness toward development of dawt /
за авторством: Ain Syafiqah Abd Wahid
Опубліковано: (2019)

The development of laboratory apparatus for flight stability and control system design. /
за авторством: Muhammad Azman
Опубліковано: (2019)

Design and develop a mechanism for reliability testing of water tap system /
за авторством: Sundararaju, Surendren
Опубліковано: (2019)

Development of ph and nutrition flow monitoring using iot for hydroponic system application /
за авторством: Kumarisperan, Amalanathan
Опубліковано: (2019)

Development of commercial can and bottle crusher for after event cleaning process (mechanical) /
за авторством: Ganasan, Yogeshwaran
Опубліковано: (2019)

Design and development of semi-automatic chocolate coating machine for small and medium enterprise (SME) /
за авторством: Muhammad Syahmil Fitri Othman
Опубліковано: (2019)

Fatigue analysis of kenaf fibre reinforced polyester composites /
за авторством: Mohd Nasaruddin Juarah
Опубліковано: (2016)

Fatigue analysis of kenaf fibre reinforced polyester composites /
за авторством: Mohd Nasaruddin Juarah
Опубліковано: (2016)

Development of an online data form for building energy audit: a case study in mardi?s plant factory /
за авторством: Muhammad Syamim Mohd Razuan
Опубліковано: (2019)

Development of an Artificial Neural Network (ANN) on retrofitting LPG-ISI spark ignition for engine performance and exhaust emissions predictions /
за авторством: Kong, Dui Dui
Опубліковано: (2019)

The effect of fused deposition modelling process parameters on the quality of abs product. /
за авторством: Sharifah Nur Shahirah Wan Suaidi
Опубліковано: (2019)

Improvement of panasonic instant water heater by using computational fluid dynamics. /
за авторством: Muhammad Firdaus Ishamuddin
Опубліковано: (2019)

Using oil palm trunk with additive of polypropylene as a replacement of wood in parquet. /
за авторством: Nurul Syahira Mohd Yunos
Опубліковано: (2019)

Determination of sound performance inside Dewan Tunku Mahkota Ismail according to various sound setting. /
за авторством: Nur Atiqah Zulkefle
Опубліковано: (2019)

The effect of control surface on the wig-crafts maneuverability in longitudinal. /
за авторством: Muhammad Hafiz Mohd Zain
Опубліковано: (2019)

The performance of RBD palm oil dielectric fluid to the electrode wear rate and surface roughness on sustainable electrical discharge machining . /
за авторством: Oliviana anak Pilo
Опубліковано: (2019)

The effectiveness of local exhaust ventilation system at FKMP welding workshop in UTHM according to safety and health. /
за авторством: Siti Aisyah @Bechik Othaman
Опубліковано: (2019)

Tool wear mechanism in milling inconel 718. /
за авторством: Shamirul Azmi
Опубліковано: (2019)

The effectiveness of air-conditioner system configuration in improving thermal comfort in UTHM lecture hall./
за авторством: Mohamad Hisyamuddin Ishak
Опубліковано: (2019)

Effect of using different solvents in the fabrication of alumina foam by foam replication method. /
за авторством: Muhd Rizuan Rusli
Опубліковано: (2019)

The performances of coated cutting tools in milling DAC52 on surface integrity . /
за авторством: Ahmad Hanafi A Manan
Опубліковано: (2019)

Investigation of seashell plate subjected to impact by flat nose and hemispherical bullet using numerical simulation /
за авторством: Nazhan A. Rahman
Опубліковано: (2019)

Energy audit on corridor and street lighting at UTHM /
за авторством: Muhamad Azfar Ahmad
Опубліковано: (2019)

Flow flactuation and wall shear stress analyses in cerebral aneurysm /
за авторством: Muhammad Rafiuddin Azman
Опубліковано: (2019)

Study on monitoring die condition in sheet metal forming process using acoustic emission /
за авторством: Wong, Hui Ing
Опубліковано: (2019)

Analysis of flow characteristics for different blade outlet angle in lvad /
за авторством: Nadaraja, Devendra
Опубліковано: (2019)

Application of exhaust gas recirculation system in small two-stroke engine /
за авторством: Muhammad Ariff Misral
Опубліковано: (2019)

Characteristic study on magnetic iron pla for 3D printing /
за авторством: Haslinda Habe
Опубліковано: (2019)

Aeolian tone generated by a square cylinder in staggered arrangement with detached flat plate /
за авторством: Sharifah Haziqah Wan Tuah
Опубліковано: (2019)

Investigation of material used for small scaled wig craft /
за авторством: Ahmad Zuhairi Aszman
Опубліковано: (2019)

Reliability analysis of Sn-Ag-Cu-Ni lead free solders during isothermal aging process /
за авторством: Mohamad Shafiq Jamaludin
Опубліковано: (2019)

Influence of boron carbide (B4C) reinforcement on solid-state recycled AA6061 BASED matrix composite by equal channel angular pressing (ECAP) /
за авторством: Ravichandran, Devaroopan
Опубліковано: (2019)