To investigate on sound level and speaker configuration inside Dewan Tunku Mahkota Ismail, UTHM /

To investigate on sound level and speaker configuration inside Dewan Tunku Mahkota Ismail, UTHM /

Veure altres versions (1)

Guardat en:

Dades bibliogràfiques
Autor principal:	Nurul Afifah Mohd Zaini (Autor)
Autor corporatiu:	Universiti Tun Hussein Onn Malaysia. Fakulti Kejuruteraan Mekanikal dan Pembuatan
Format:	Thesis Llibre
Publicat:	Batu Pahat : Universiti Tun Hussein Onn Malaysia, 2019.
Matèries:	.
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

To investigate on sound level and speaker configuration inside Dewan Tunku Mahkota Ismail, UTHM /
per: Nurul Afifah Mohd Zaini
Publicat: (2019)

Determination of sound performance inside Dewan Tunku Mahkota Ismail according to various sound setting. /
per: Nur Atiqah Zulkefle
Publicat: (2019)

Determination of sound performance inside Dewan Tunku Mahkota Ismail according to various sound setting. /
per: Nur Atiqah Zulkefle
Publicat: (2019)

The effectiveness of air-conditioner system configuration in improving thermal comfort in UTHM lecture hall./
per: Mohamad Hisyamuddin Ishak
Publicat: (2019)

Energy audit on corridor and street lighting at UTHM /
per: Muhamad Azfar Ahmad
Publicat: (2019)

Study on sound absorption properties of rubber wood fibre reinforced with epoxy resin /
per: Muhammad Hanafi Abd Rahman
Publicat: (2019)

The effectiveness of local exhaust ventilation system at FKMP welding workshop in UTHM according to safety and health. /
per: Siti Aisyah @Bechik Othaman
Publicat: (2019)

Evaluation of acmv chiller performance towards energy efficiency: case study in PTTA and technology complex, UTHM /
per: Muhammad Syafiq Selamat
Publicat: (2019)

Numerical investigation of diffuser effectiveness toward development of dawt /
per: Ain Syafiqah Abd Wahid
Publicat: (2019)

Investigation of material used for small scaled wig craft /
per: Ahmad Zuhairi Aszman
Publicat: (2019)

A study of sound and vibration transmissibility of rigid polyurethane composite foam doped with areca fibre in slab railway application. /
per: Nabilah Kassim
Publicat: (2019)

Investigation of curing conductive ink on conformal metal substrate using halogen lamp /
per: Muhammad Khairunnas Hamdani
Publicat: (2019)

Investigation of seashell plate subjected to impact by flat nose and hemispherical bullet using numerical simulation /
per: Nazhan A. Rahman
Publicat: (2019)

The effect of activated carbon as an additive in rbd palm olein-based trimethylolpropane (TMP) ester on turning process /
per: Mohd Afkar Syauqi Mohd Zaini
Publicat: (2019)

Past year examination paper for estate agents /
per: .

Textile Progress.
per: Seyam, A. M.
Publicat: (2002)

Evaluation of kenaf fibre for the development of kenaf/polyester hybrid yarn. /
per: Anis Amirah Nor Anuwar
Publicat: (2019)

The effect of fused deposition modelling process parameters on the quality of abs product. /
per: Sharifah Nur Shahirah Wan Suaidi
Publicat: (2019)

Improvement of panasonic instant water heater by using computational fluid dynamics. /
per: Muhammad Firdaus Ishamuddin
Publicat: (2019)

Using oil palm trunk with additive of polypropylene as a replacement of wood in parquet. /
per: Nurul Syahira Mohd Yunos
Publicat: (2019)

The development of laboratory apparatus for flight stability and control system design. /
per: Muhammad Azman
Publicat: (2019)

The effect of control surface on the wig-crafts maneuverability in longitudinal. /
per: Muhammad Hafiz Mohd Zain
Publicat: (2019)

The performance of RBD palm oil dielectric fluid to the electrode wear rate and surface roughness on sustainable electrical discharge machining . /
per: Oliviana anak Pilo
Publicat: (2019)

Tool wear mechanism in milling inconel 718. /
per: Shamirul Azmi
Publicat: (2019)

Effect of using different solvents in the fabrication of alumina foam by foam replication method. /
per: Muhd Rizuan Rusli
Publicat: (2019)

The performances of coated cutting tools in milling DAC52 on surface integrity . /
per: Ahmad Hanafi A Manan
Publicat: (2019)

Flow flactuation and wall shear stress analyses in cerebral aneurysm /
per: Muhammad Rafiuddin Azman
Publicat: (2019)

Design and development of semi-automatic chocolate coating machine for small and medium enterprise (SME) /
per: Muhammad Syahmil Fitri Othman
Publicat: (2019)

Study on monitoring die condition in sheet metal forming process using acoustic emission /
per: Wong, Hui Ing
Publicat: (2019)

Development of ph and nutrition flow monitoring using iot for hydroponic system application /
per: Kumarisperan, Amalanathan
Publicat: (2019)

Development of an online data form for building energy audit: a case study in mardi?s plant factory /
per: Muhammad Syamim Mohd Razuan
Publicat: (2019)

Analysis of flow characteristics for different blade outlet angle in lvad /
per: Nadaraja, Devendra
Publicat: (2019)

Application of exhaust gas recirculation system in small two-stroke engine /
per: Muhammad Ariff Misral
Publicat: (2019)

Study on mechanical properties of epoxy resin reinforced by coir fibre /
per: Muhammad Wafiuddin Abdul Halim
Publicat: (2019)

Development of an Artificial Neural Network (ANN) on retrofitting LPG-ISI spark ignition for engine performance and exhaust emissions predictions /
per: Kong, Dui Dui
Publicat: (2019)

Characteristic study on magnetic iron pla for 3D printing /
per: Haslinda Habe
Publicat: (2019)

Aeolian tone generated by a square cylinder in staggered arrangement with detached flat plate /
per: Sharifah Haziqah Wan Tuah
Publicat: (2019)

Development of motorised monoplane wings for educational kit /
per: Aiman Nur Hakim Ahmad Rizal
Publicat: (2019)

Reliability analysis of Sn-Ag-Cu-Ni lead free solders during isothermal aging process /
per: Mohamad Shafiq Jamaludin
Publicat: (2019)

Design and develop a mechanism for reliability testing of water tap system /
per: Sundararaju, Surendren
Publicat: (2019)