Stress analysis of a ladder type chasis for Scania construction truck /

Stress analysis of a ladder type chasis for Scania construction truck /

Veure altres versions (1)

Guardat en:

Dades bibliogràfiques
Autor principal:	Fakhri Syakirin Sullini (Autor)
Format:	Software eBook
Idioma:	English
Publicat:	2013.
Matèries:	Strength of materials. Structural analysis (Engineering). Strains and stresses. Truck > Chasis > Testing.
Etiquetes:	Afegir etiqueta Sense etiquetes, Sigues el primer a etiquetar aquest registre!

Ítems similars

Stress analysis of a ladder type chasis for Scania construction truck /
per: Fakhri Syakirin Sullini
Publicat: (2013)

Advanced strength and applied stress analysis
per: Budynas, Richard G.
Publicat: (1999)

Advanced strength and applied stress analysis
per: Budynas, Richard G.
Publicat: (1999)

Analysis of strength and deformation for thin walled chassis under torsional and bending loads /
per: Muhammad Faiz Izwan Mohd Yusof
Publicat: (2019)

Textbook of mechanics of materials
per: Shesha Prakash, M. N.
Publicat: (2011)

Textbook of mechanics of materials
per: Shesha Prakash, M. N.
Publicat: (2011)

Analysis of strength and deformation for thin walled chassis under torsional and bending loads /
per: Muhammad Faiz Izwan Mohd Yusof
Publicat: (2019)

Textbook of mechanics of materials
per: Shesha Prakash, M. N.
Publicat: (2011)

Textbook of mechanics of materials
per: Shesha Prakash, M. N.
Publicat: (2011)

Roark's formulas for stress and strain
per: Young, Warren C.
Publicat: (2012)

Roark's formulas for stress and strain
per: Young, Warren C.
Publicat: (2012)

Structural and stress analysis
per: Megson, T. H. G.
Publicat: (2005)

Structural and stress analysis
per: Megson, T. H. G.
Publicat: (2005)

Study of stress distributions on commercial surgical 316LVM semi tubular and one-third tubular plates using simulation approach /
per: Ahmad Afifuddin Md Aris
Publicat: (2019)

Study of stress distributions on commercial surgical 316LVM semi tubular and one-third tubular plates using simulation approach /
per: Ahmad Afifuddin Md Aris
Publicat: (2019)

Statics and strength of materials
per: Mott, Robert L.
Publicat: (2010)

Statics and strength of materials
per: Mott, Robert L.
Publicat: (2010)

Teori Kekenyalan
per: Timoshenko, S. P. 1878-1972, et al.
Publicat: (1997)

Theory of elasticity
per: Timoshenko, S.P
Publicat: (1970)

Theory of elasticity
per: Timoshenko, S.P
Publicat: (1970)

Statics and strength of materials
per: Mott, Robert L.
Publicat: (2010)

Statics and strength of materials
per: Mott, Robert L.
Publicat: (2010)

Teori Kekenyalan
per: Timoshenko, S. P. 1878-1972, et al.
Publicat: (1997)

Study of stress distribution and mechanical behaviour on commercial surgical 316LVM self compression plates with thickness 2 MM and 1 MM using simulation approach /
per: Mohd Farid Kamal
Publicat: (2019)

Study of stress distribution and mechanical behaviour on commercial surgical 316LVM self compression plates with thickness 2 MM and 1 MM using simulation approach /
per: Mohd Farid Kamal
Publicat: (2019)

Elements of stress analysis
per: Heyman, Jacques
Publicat: (2008)

Elements of stress analysis
per: Heyman, Jacques
Publicat: (2008)

Kajian kesan suhu terhadap keluli lembut pada daya serenjang /
per: Raja Izhar Azuan Raja Izam
Publicat: (2008)

Investigation of impact strain signal characteristics leading to failure classification /
per: Mohd Basri Ali, et al.
Publicat: (2017)

Kajian kesan suhu terhadap keluli lembut pada daya serenjang /
per: Raja Izhar Azuan Raja Izam
Publicat: (2008)

Investigation of impact strain signal characteristics leading to failure classification /
per: Mohd Basri Ali, et al.
Publicat: (2017)

Strength and safety evaluation of automotive's component which steering knuckle and material that have been used /
per: Mohamad Fazrie Mahadi
Publicat: (2009)

Merekabentuk rasuk untuk menganalisis sifat ketegangan tekanan dengan menggunakan tolok terikan untuk rasuk berlainan bahan /
per: Mohd Faizuddin Mohamed
Publicat: (2008)

The effect of microstructure on the mechanical properties of dual phase steel /
per: Abdul Hibri Abdul Majid
Publicat: (2011)

A study on the effect of different martensite volume fraction to the mechanical properties of dual phase steel
Publicat: (2012)

Strength and safety evaluation of automotive's component which steering knuckle and material that have been used /
per: Mohamad Fazrie Mahadi
Publicat: (2009)

A study on the effect of different martensite volume fraction to the mechanical properties of dual phase steel
Publicat: (2012)

The effect of microstructure on the mechanical properties of dual phase steel /
per: Abdul Hibri Abdul Majid
Publicat: (2011)

Merekabentuk rasuk untuk menganalisis sifat ketegangan tekanan dengan menggunakan tolok terikan untuk rasuk berlainan bahan /
per: Mohd Faizuddin Mohamed
Publicat: (2008)

Fatigue life properties of alloy steel at different stress ratio /
per: Elmahi, Saad Ali Eltigani
Publicat: (2016)