The Effect of Nickel Addition for Glass Formability of Cu-Ti-Ni Amorphous Alloy /

The Effect of Nickel Addition for Glass Formability of Cu-Ti-Ni Amorphous Alloy /

The aim of this study is to investigate the effect of nickel addition on the Cu50 -Ti50 -Nix amorphous alloy in terms of glass formability with the addition of Ni on different percentages (X= 5%, 10%). The first phase of this project is sample preparation. The sample, Cu-Ti-Ni was prepared by mechan...

Fuld beskrivelse

Saved in:

Bibliografiske detaljer
Hovedforfatter:	Wan Ahmad Aiman Wan Salleh
Institution som forfatter:	Universiti Malaysia Perlis
Format:	Thesis Software eBog
Sprog:	English
Udgivet:	Perlis,Malaysia School of Materials Engineering, Universiti Malaysia Perlis 2017
Fag:	Metallurgy.
Tags:	Tilføj Tag Ingen Tags, Vær først til at tagge denne postø!

Lignende værker

Development of Al-Ni-Cu Amorphous Alloy Powder /
af: Norliyana Mustapar
Udgivet: (2017)

Effect of Zinc Additions on SN-0.7CU-0.05NI Lead Free Solder Alloy /
af: Nurul Ashikin Saleh
Udgivet: (2017)

Effect of corrosion in acidic solution to the phase and microstructure of sn-cu solder/
af: Gan, Zhi Wan
Udgivet: (2016)

Effect of solution treatment temperature on the microstructure of fe-40ni-24cr alloy /
af: Nuraliah Nazirah Mohd Hassan
Udgivet: (2016)

The effect of heat treatment on Fe-Ni/Sic composite
af: Lai, Moon Yee

Microstructure development of Al-Mg-Si-Cu powder metallurgy under different addition of Sn
af: Khairunnisa Omar

The Effect Of Iron Addition And Tungsten Content On The Corrosion Resistance Of W-Pre Alloy Brass Composite/
af: Rozi Bin Ewol
Udgivet: (2016)

Infuence of grain size on isothermal oxidation of fe-33ni-19cr alloy/
af: Izzat Bin Mohd Noor
Udgivet: (2016)

Aging effect of sn-ag-cu lead free solder
af: Mohd Jaffry Radzi

Fabrication of Al-based Metallic Glasses by Mechanical Alloying and Hot Consolidation /
af: Ng, Chun Ming
Udgivet: (2017)

The process of electroplating in presence of nickel salts
af: Mohd Saiful Khairuddin Azahar

Study of nickel electroplating on copper plate/
af: Zahraa Binti Zulnuraini
Udgivet: (2016)

Effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr /
af: Siti Aisyah Che Sakdun
Udgivet: (2017)

Thermoelectric properties of nickel zinc ferrite - polyester /
af: Muhammad Asnawi Bin Kamaruddin
Udgivet: (2016)

Effect of temperature of electrolyte and anodizing voltage on the synthesis of cu2o nanostructures by anodizing/
af: Chew, Jun Yuen
Udgivet: (2016)

Effect of polarization scan rate on corrosion in acidic solution to the properties of Sn-Cu solder/
af: Low, Suk Yen
Udgivet: (2016)

The study of mechanical and thermoelectric properties of nickel zinc ferrite /
af: Noor Amalina Binti Mat Zin
Udgivet: (2016)

Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
af: Khairul Khusairi Kamaludin

The effect of alloying elements in sintered-recycle steel compaction
af: Mohd Fauzi Jaafar

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
af: Muhammad Afiq Bin Mohd Razak
Udgivet: (2016)

Effect of ratio of ethylene glycol/water and concentration of ammonium fluoride on the synthesis of Cu2o nanostructures By Anodizing/
af: Yeoh, Shi Rou
Udgivet: (2016)

Sintering atmosphere effect on AI-0.2mg alloy
af: Muhammad Firdaus Rosli

Effect of Winding Angles on The Epoxy/Kenaf/Glass Fiber Hybrid Composite by Filament Winding Process /
af: Mahtumah Honani
Udgivet: (2017)

Sintering behavior and microstructural characterization of aluminium copper powder compact (al-4.4cu-0.8si-0.5mgwt%) alloy prepared by powder metallurgy
af: Looi, Mei Yen

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
af: Khairul Nazri Taha

Recovery of copper (Cu) from printed circuit board (PCB) using lakos separator
af: Syed Aqil Syed Nadzir

The Effect of Hap Addition on the Physical and Mechanical Properties of Co-Cr-Mo/Hap Composites for Biomedical Apllications/
af: Muhammad Zulhilmi Shukor
Udgivet: (2015)

Electroplating Copper on Aluminium Alloy/
af: Nurhafizah Binti Ku Abdullah
Udgivet: (2016)

Effect of particle size and milling process on the microstructure and thermal properties of copper silicon carbide (CuSiC) composites for electronic packing application
af: Chuah, Run Yi

The effect of sintering temperature to the synthetic and natural hydroxyapatite (HA) added with 1% tin (IV) oxide (Sno2) as additive
af: Nor Izurah Ismail

The anodizing of sintered mg/ca alloys/
af: Norhadira Fatin Binti Wardi
Udgivet: (2016)

Effects of volume fraction and particle size reinforcement parameter to microstructure and thermal properties of copper silicon carbide (CuSiC) composite for electronic pakaging application
af: Siti Amira Faisha Shikh Zakaria

Effect of grinding media size and shape on the iron mill scale particle and properties
af: Che Wan Noorakma Abdullah

Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
af: Izrul Azree Mohd Zaki

Synthesis and Characterization of Ternary Glass Composition Derived by sol-gel Method /
af: Nik Nur Syahirah Nik Suhaimi
Udgivet: (2017)

Synthesis and characterization of glass fiber grade specimen using different source of Kaolin /
af: Tan, Yan Jun
Udgivet: (2017)

Anodizing process of Mg alloy using low potential /
af: Siti Auni Shafiqah Makhtar
Udgivet: (2017)

Modelling aging kinetics of aluminium alloy aa2124/
af: Tiaw, Wei Ping
Udgivet: (2016)

Modelling aging kinetics of aluminium alloy AA2124/
af: Mohamad Zulhilmi Bin Md Nasir
Udgivet: (2016)

Synthesis and characterization of fe-al alloy with different sintering temperature
af: Maimum Razali