The Effect of Nickel Addition for Glass Formability of Cu-Ti-Ni Amorphous Alloy /

The Effect of Nickel Addition for Glass Formability of Cu-Ti-Ni Amorphous Alloy /

The aim of this study is to investigate the effect of nickel addition on the Cu50 -Ti50 -Nix amorphous alloy in terms of glass formability with the addition of Ni on different percentages (X= 5%, 10%). The first phase of this project is sample preparation. The sample, Cu-Ti-Ni was prepared by mechan...

पूर्ण विवरण

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखक:	Wan Ahmad Aiman Wan Salleh
निगमित लेखक:	Universiti Malaysia Perlis
स्वरूप:	थीसिस सॉफ्टवेयर ई-पुस्तक
भाषा:	English
प्रकाशित:	Perlis,Malaysia School of Materials Engineering, Universiti Malaysia Perlis 2017
विषय:	Metallurgy.
टैग :	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

Development of Al-Ni-Cu Amorphous Alloy Powder /
द्वारा: Norliyana Mustapar
प्रकाशित: (2017)

Effect of Zinc Additions on SN-0.7CU-0.05NI Lead Free Solder Alloy /
द्वारा: Nurul Ashikin Saleh
प्रकाशित: (2017)

Effect of corrosion in acidic solution to the phase and microstructure of sn-cu solder/
द्वारा: Gan, Zhi Wan
प्रकाशित: (2016)

Effect of solution treatment temperature on the microstructure of fe-40ni-24cr alloy /
द्वारा: Nuraliah Nazirah Mohd Hassan
प्रकाशित: (2016)

The effect of heat treatment on Fe-Ni/Sic composite
द्वारा: Lai, Moon Yee

Microstructure development of Al-Mg-Si-Cu powder metallurgy under different addition of Sn
द्वारा: Khairunnisa Omar

The Effect Of Iron Addition And Tungsten Content On The Corrosion Resistance Of W-Pre Alloy Brass Composite/
द्वारा: Rozi Bin Ewol
प्रकाशित: (2016)

Infuence of grain size on isothermal oxidation of fe-33ni-19cr alloy/
द्वारा: Izzat Bin Mohd Noor
प्रकाशित: (2016)

Aging effect of sn-ag-cu lead free solder
द्वारा: Mohd Jaffry Radzi

Fabrication of Al-based Metallic Glasses by Mechanical Alloying and Hot Consolidation /
द्वारा: Ng, Chun Ming
प्रकाशित: (2017)

The process of electroplating in presence of nickel salts
द्वारा: Mohd Saiful Khairuddin Azahar

Study of nickel electroplating on copper plate/
द्वारा: Zahraa Binti Zulnuraini
प्रकाशित: (2016)

Effect of heat treatment on the isothermal oxidation of Fe-33Ni-19Cr /
द्वारा: Siti Aisyah Che Sakdun
प्रकाशित: (2017)

Thermoelectric properties of nickel zinc ferrite - polyester /
द्वारा: Muhammad Asnawi Bin Kamaruddin
प्रकाशित: (2016)

Effect of temperature of electrolyte and anodizing voltage on the synthesis of cu2o nanostructures by anodizing/
द्वारा: Chew, Jun Yuen
प्रकाशित: (2016)

Effect of polarization scan rate on corrosion in acidic solution to the properties of Sn-Cu solder/
द्वारा: Low, Suk Yen
प्रकाशित: (2016)

The study of mechanical and thermoelectric properties of nickel zinc ferrite /
द्वारा: Noor Amalina Binti Mat Zin
प्रकाशित: (2016)

Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
द्वारा: Khairul Khusairi Kamaludin

The effect of alloying elements in sintered-recycle steel compaction
द्वारा: Mohd Fauzi Jaafar

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
द्वारा: Muhammad Afiq Bin Mohd Razak
प्रकाशित: (2016)

Effect of ratio of ethylene glycol/water and concentration of ammonium fluoride on the synthesis of Cu2o nanostructures By Anodizing/
द्वारा: Yeoh, Shi Rou
प्रकाशित: (2016)

Sintering atmosphere effect on AI-0.2mg alloy
द्वारा: Muhammad Firdaus Rosli

Effect of Winding Angles on The Epoxy/Kenaf/Glass Fiber Hybrid Composite by Filament Winding Process /
द्वारा: Mahtumah Honani
प्रकाशित: (2017)

Sintering behavior and microstructural characterization of aluminium copper powder compact (al-4.4cu-0.8si-0.5mgwt%) alloy prepared by powder metallurgy
द्वारा: Looi, Mei Yen

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
द्वारा: Khairul Nazri Taha

Recovery of copper (Cu) from printed circuit board (PCB) using lakos separator
द्वारा: Syed Aqil Syed Nadzir

The Effect of Hap Addition on the Physical and Mechanical Properties of Co-Cr-Mo/Hap Composites for Biomedical Apllications/
द्वारा: Muhammad Zulhilmi Shukor
प्रकाशित: (2015)

Electroplating Copper on Aluminium Alloy/
द्वारा: Nurhafizah Binti Ku Abdullah
प्रकाशित: (2016)

Effect of particle size and milling process on the microstructure and thermal properties of copper silicon carbide (CuSiC) composites for electronic packing application
द्वारा: Chuah, Run Yi

The effect of sintering temperature to the synthetic and natural hydroxyapatite (HA) added with 1% tin (IV) oxide (Sno2) as additive
द्वारा: Nor Izurah Ismail

The anodizing of sintered mg/ca alloys/
द्वारा: Norhadira Fatin Binti Wardi
प्रकाशित: (2016)

Effects of volume fraction and particle size reinforcement parameter to microstructure and thermal properties of copper silicon carbide (CuSiC) composite for electronic pakaging application
द्वारा: Siti Amira Faisha Shikh Zakaria

Effect of grinding media size and shape on the iron mill scale particle and properties
द्वारा: Che Wan Noorakma Abdullah

Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
द्वारा: Izrul Azree Mohd Zaki

Synthesis and Characterization of Ternary Glass Composition Derived by sol-gel Method /
द्वारा: Nik Nur Syahirah Nik Suhaimi
प्रकाशित: (2017)

Synthesis and characterization of glass fiber grade specimen using different source of Kaolin /
द्वारा: Tan, Yan Jun
प्रकाशित: (2017)

Anodizing process of Mg alloy using low potential /
द्वारा: Siti Auni Shafiqah Makhtar
प्रकाशित: (2017)

Modelling aging kinetics of aluminium alloy aa2124/
द्वारा: Tiaw, Wei Ping
प्रकाशित: (2016)

Modelling aging kinetics of aluminium alloy AA2124/
द्वारा: Mohamad Zulhilmi Bin Md Nasir
प्रकाशित: (2016)

Synthesis and characterization of fe-al alloy with different sintering temperature
द्वारा: Maimum Razali