Study of surface roughness during droplet impact on a heated aluminium

Study of surface roughness during droplet impact on a heated aluminium

The main objective of this project is to study the surface roughness of material at different surface temperature and relationship between temperatures at high and low temperature. This experiment utilized Aluminium and the material will place on the hot plate. The droplet of the water will be relea...

Полное описание

Сохранить в:

Библиографические подробности
Главный автор:	Arulappan, Teevagar Gabrial Nayagam
Соавтор:	University Malaysia Perlis
Формат:	Диссертация Программное обеспечение eКнига
Язык:	English
Опубликовано:	Perlis, Malaysia School of Manufacturing Engineering, University Malaysia Perlis 2016
Предметы:	Industrial engineering.
Метки:	Добавить метку Нет меток, Требуется 1-ая метка записи!

Схожие документы

Study of surface roughness during droplet impact on a heated aluminium /
по: Teevagar Gabrial Nayagam A/L Arulappan
Опубликовано: (2016)

Study of surface roughness during droplet impact on a heated stainless steel /
по: Azra Idzkandar ABU zahar
Опубликовано: (2016)

Study of surface roughness During droplrt impact on a heated stainless steel/
по: Azra Idzkandar ABU zahar
Опубликовано: (2016)

Experimenal study of droplet evaporation boiling curve using aluminium /
по: Mardhiah Binti Abdul Wahab
Опубликовано: (2016)

Experimental study of droplet evaporation boiling curve using aluminium /
по: Mardhiah Abdul Wahab
Опубликовано: (2016)

Experimental study of droplet evaporation boiling curve using stainless steel /
по: Goh, Wan Gin
Опубликовано: (2016)

Experimental study of droplet evaporation boiling curve using stainless steel /
по: Goh, Wan Gin
Опубликовано: (2016)

A study on surface roughness of wood using CNC milling process/
по: Mohd. Suhairi Bin Saary
Опубликовано: (2016)

A study on surface roughness of cast iron using CNC milling process /
по: Ismail Mahamad Hakimi
Опубликовано: (2010)

A thermal study on workpiece during turning process /
по: Faris Aidil Moamed Daud
Опубликовано: (2016)

A thermal study on workpiece during turning process /
по: Faris Aidil Mohamed Daud
Опубликовано: (2016)

Investigation of surface roughness and chip formation on peck drilling of mild steel /
по: Darrel Elroy Bin Soipu
Опубликовано: (2016)

Investigation of surface roughness and chip formation on peck drilling of mild steel/
по: Darrel Elroy Soipu
Опубликовано: (2016)

Study on effects driver's postures on comfort during driving /
по: Emera Fataha Abu
Опубликовано: (2010)

Investigation of surface roughness and choip formation on through hole drilling of mild stell /
по: Nurfatin Syakira Balqis Mohamed Aminuddin
Опубликовано: (2016)

Study of heat transfer characteristics of SIO2 nanoparticles in heat pipes/
по: Sarimila A/P Kannakasavei
Опубликовано: (2016)

Study of heat transfer characteristics of AL2O3 nanoparticles in heat pipes/
по: Vivoganantha, Mukeshmahen
Опубликовано: (2016)

Study of heat transfer characteristics of al2O3 nanoparticles in heat pipes /
по: Mukeshmahen A/L Vivoganantha
Опубликовано: (2016)

A study of compressive and impact properties of jute lamnate structure composite/
по: Nor Azam Binti Ramlee
Опубликовано: (2016)

A study of compressive and impact properties of jute laminate structure composite
по: Nor Azam Ramlee
Опубликовано: (2016)

Analysis of lemang making process during cooking using CFD/
по: Muhamad Rasshidi B Razali @ Ghazali
Опубликовано: (2010)

Review study on design of vacuum frying using gas heating /
по: Mohammad Syafiq Amlus
Опубликовано: (2016)

Review study on design of vacuum fry dryer using gas heating/
по: Mohammad Syafiq Amlus
Опубликовано: (2016)

Mechanical properties of aluminium (Experiment and finite element analysis) /
по: Nurul Ilfani Binti Abd Wahab
Опубликовано: (2016)

Mechanical properties of aluminium (experiment and finite element analysis) /
по: Nurul Ilfani Abd Wahab
Опубликовано: (2016)

Evaluation the power consumption on cutting parameters during cnc machining using taguchi method /
по: Foo, Ming Wei
Опубликовано: (2016)

Analysis of carbon footprint during cnc turning by using life cycle assessment method/
по: Chim, Cheing Han
Опубликовано: (2016)

Evaluation the power consumption on cutting parameters during CNC machining using taguchi method /
по: Foo, Ming Wei
Опубликовано: (2016)

Analysis of carbon footprint during cnc turning by using life cycle assessment method /
по: Chim, Cheing Han
Опубликовано: (2016)

Analysis of two dimensional CFD modeling and simulation inside lemang oven during cooking /
по: Nurul Fariza Mohamed Elias
Опубликовано: (2010)

Impact strength on thin-walled tubes/
по: Dzul Iman Ramli
Опубликовано: (2016)

Impact strength on thin-walled tubes/
по: Dzul Iman Ramli
Опубликовано: (2016)

Study on heat flux variation due to temperature humdity and ventilation flow for a model house for a certain continuous period /
по: Farizul Amri Mohammad
Опубликовано: (2016)

Study on heat flux variation due to temperature humdity and ventilation flow for a model house for a certain continuous period /
по: Farizul Amri Mohammad
Опубликовано: (2016)

Optimization of cutting parameter under mql nanolubricant approach during cnc turnin using taguchi method /
по: Mohd Faizul Izwan Ibrahim
Опубликовано: (2016)

Optimization of cutting parameter under mql nanolubricant approach during cnc turnin using taguchi method /
по: Mohd Faizul Izwan Ibrahim
Опубликовано: (2016)

Study of machining parameter of wire electrical discharge of nickel-base alloys using response surface method (RSM) /
по: Syed Abdul Malek Syed Adanan
Опубликовано: (2010)

Design and fabricction of an water chamber for high impact penetrator /
по: Mohamad Fikri Mohd Ishak
Опубликовано: (2016)

Design and fabrication of an water chamber for high impact penetrator/
по: Mohamad Fikri Mohd Ishak
Опубликовано: (2016)

Experimental analysis of the efficiency of CNC machining for curved surface/
по: Chew, Heng Sang
Опубликовано: (2010)