Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)

Surface and grain size characterization of gallium and tantalum doped Ba0.5Sr0.5TiO3 Thin film using atomic force microscope (AFM)

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखक:	Safinah Nor Bt Jusoh (लेखक)
स्वरूप:	पुस्तक
भाषा:	English
विषय:	Atomic force microscopy
टैग :	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

A study on surface roughness and morphology of Gallium Oxide Doped Ba0.5 Sr0.5 Ti03 thin film
द्वारा: Fadrul Hisham Mohd Fauzi

Structural & electrical characterization of Ba(0.5)S(0.5)Tio3 thin films in effect annealing temperature
द्वारा: Ramadhan Adnan

Effect of annealing temperature and dopant concertration on the surface layer of indium doped Ba0.5Sr0.5Ti03 thin film
द्वारा: Noor Khairul Anuar Johari

Penghasilan katod komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2 O3) Samaria Terdop Seri Karbonat (SDCC) /
द्वारा: Mohamed Hakim Ahmad Shah
प्रकाशित: (2015)

Pengaruh suhu kalsium terhadap serbuk komposit barium strontium kobalt ferit (Ba0.5 Sr0.5 Co0.8 Fe0.2)- samarium terdop seria karbonat (SDCC)/
द्वारा: Shaibool Afandi Ladim
प्रकाशित: (2016)

Analog circuit design techniques at 0.5℗V
प्रकाशित: (2007)

Analog circuit design techniques at 0.5v /
द्वारा: Chatterjee, Shouri
प्रकाशित: (2007)

Analog circuit design techniques at 0.5v /
द्वारा: Chatterjee, Shouri
प्रकाशित: (2007)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
द्वारा: Dyana Chahit
प्रकाशित: (2017)

Effect of different pyrolysis and annealing temperature on structural and electrical properties of K0.5Na0.5(NbO)3 thin film /
द्वारा: Dyana Chahit
प्रकाशित: (2017)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
द्वारा: Azzlyn Zurain Zamri
प्रकाशित: (2019)

Effect of ZnO nanowhiskers on the K0.5Na0.5NbO3 thin film via the hybrid sol gel route/
द्वारा: Azzlyn Zurain Zamri
प्रकाशित: (2019)

Effect of post-reflow cooling rate and isothermal aging on imc formation between Sn-3.0Ag-0.5Cu-0.5Ni lead-free Solders and Enimag /
द्वारा: Zolhafizi Jaidi
प्रकाशित: (2016)

Harvard graphics 3.0/3.05.
प्रकाशित: (1994)

Harvard graphics 3.0/3.05.
प्रकाशित: (1994)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
द्वारा: Nurilham Zakiah Nazarudin
प्रकाशित: (2017)

Turning cutting tool specialty for small (TINY) diameter (between 0.5mm to 5.0mm) of workpiece /
द्वारा: Nurilham Zakiah Nazarudin
प्रकाशित: (2017)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
द्वारा: Mohammed Ahmed AbdulWahab
प्रकाशित: (2016)

Flow characteristics around tube banks with integral wake splitter 0D,0.5D and 1.5D /
द्वारा: Mohammed Ahmed AbdulWahab
प्रकाशित: (2016)

Load test of 0.5hp ac induction motor using coupling system /
द्वारा: Ting Siu Hui
प्रकाशित: (2011)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
द्वारा: Haziezol Helmi Mohd Yusof, और अन्य
प्रकाशित: (2017)

Performance optimization on Lead-Free Piezoceramic (K0.5Na0.5NbO3) (KNN) integrated resonant structure in electrical power generation as a green energy source /
द्वारा: Haziezol Helmi Mohd Yusof, और अन्य
प्रकाशित: (2017)

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
द्वारा: Muhammad Afiq Bin Mohd Razak
प्रकाशित: (2016)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
द्वारा: Anayet Karim
प्रकाशित: (2014)

Modeling and development of 0.5 hp induction motor with reduced rotor slots and stator core /
द्वारा: Anayet Karim
प्रकाशित: (2014)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
द्वारा: Yanawati Yahya
प्रकाशित: (2016)

Design of 0.5 hp induction motor rotor bars with 0.35 mm and 0.50 mm thickness of steel sheets for rotor fabrication /
द्वारा: Yanawati Yahya
प्रकाशित: (2016)

Mengkaji corak semburan yang dihasilkan oleh nozzle rekabentuk mudah dan komplek terhadap perubahan tekanan (0.5, 1.0, 1.5, 2.0, 2.5 dan 3.0 bar) /
द्वारा: Mohd Lutfi Suhaini
प्रकाशित: (2015)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
द्वारा: Josphene J. Endam
प्रकाशित: (2005)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
द्वारा: Nor Shafiqin Sahrifuddin
प्रकाशित: (2012)

The effect of different stator slot size on flux and losses distribution in 0.5 Hp induction motor /
द्वारा: Nor Shafiqin Sahrifuddin
प्रकाशित: (2012)

Three-phase 115-203V, 0.5HP variable speed motor drives controller
द्वारा: Josphene J. Endam
प्रकाशित: (2005)

Psychology 04/05
प्रकाशित: (2004)

Health 04/05
प्रकाशित: (2004)

Psychology 04/05
प्रकाशित: (2004)

Health 04/05
प्रकाशित: (2004)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
द्वारा: Khairul Nazri Taha

Marketing 05/06 : annual editions /
प्रकाशित: (2005)

Introduction to photoshop 4.0/5.0 /
द्वारा: Thomas, Suzanne Sayegh
प्रकाशित: (1999)

Foundations of logic 1903 - 05 /
द्वारा: Russell, Bertrand
प्रकाशित: (1994)