Optimization of nitride deposition process using Taguchi method

Optimization of nitride deposition process using Taguchi method

This final year project is mainly focused on obtaining the most optimize parameters of PECVD Si3N4 deposition process by using DOE. The Taguchi method of DOE will be used in performing optimization of the deposition process. Raw data for the deposition process is provided by the deposition module fr...

Полное описание

Сохранить в:

Библиографические подробности
Главный автор:	Low, Zen Shiang (Автор)
Формат:	Электронный ресурс Программное обеспечение База данных
Язык:	English
Предметы:	Microelectronics.
Метки:	Добавить метку Нет меток, Требуется 1-ая метка записи!

Схожие документы

Comparison of etching optimization process by taguchi method using minitab and design expert software
по: Azleen Abu Talib

Analysis of MEMS accelerometer sensor by using taguchi optimization method /
по: Nurul Izati Md. Johan
Опубликовано: (2015)

Analysis of MEMS accelerometer sensor by using taguchi optimization method /
по: Nurul Izati Md. Johan
Опубликовано: (2015)

Optimization on oxidation process using 2K factorial design method
по: Yeap, Li Chain

Analysis of deposited carbon based on electron beam induced deposition in scanning electron microscopy using secondary ion mass spectrometry
по: Nur Liana Kamal

Study of deposition time influence the conical structure during electron beam induced deposition (EBID)
по: Mohamad Shahrizal Md Ilias

The influence on the accelerating voltages on the growth of the square structure during electron beam induced deposition (EBID) method
по: Muhammad Afiq Abdul Aziz

Analysis of square shaped microstructure based electron bean induced deposition
по: Siti Fatimah Abdul Rahman

Electrical characterization of 0.15um CMOS transistor using tsuprem-4 and medici
по: Low, Pooi Lam

Optimization of glucose production from rice husk by using cellulase enzyme /
по: Nurhidayah Kamaruddin
Опубликовано: (2013)

Simulation of ion implantation using Monte Carlo method for investigation on ion trajectories
по: Zainab Ramli

Study of the thickness of the silicon dioxide on wafer using dry and wet oxidation method
по: Mohamad Fadzli Ali

Intrusion detectionsystem
по: Low Kar Xin
Опубликовано: (2015)

Polysilicon process development - the effect of pecvd process parameters on the film characteristics
по: Mujahidun Mashuri

Method of measurement of LTCC metallization thickness
по: Lee, Soo Khiang

Thin polycrystalline silicon process development
по: Muniyati Pakhuruddin

Comparison of Delays Between 4-Bits Ripple-Carry Adder And 4-Bits Carry Look-Ahead Adder Using Logical Effort Method/
по: Siti Nurhanani Che Yahya
Опубликовано: (2011)

Semiconductor optical amplifier (SOA) for photonic signal processing/
по: Latty Shazana Ismail
Опубликовано: (2011)

Area array packaging processes : for BGA, flip chip and CSP /
Опубликовано: (2004)

Area array packaging processes : for BGA, Flip Chip, and CSP /

Fabrication of 50 ¡Łm transistor and AINiAu interconnection process
по: Shaffie Husin

Design and Analysis of a Digital Signal Processing for Biomedical Application System/
по: Ch'ng, Ei Peng
Опубликовано: (2011)

Automated classroom reservation using SMS
по: Nurul Nadiah Binti Mohamed Hatta
Опубликовано: (2015)

The effect of process parameters on metal step coverage for aluminum (AI) by evaporation technique
по: Noraishah Azman

Student attendance management system using RFID
по: Nurul A'qilah Bt. Hasmizi
Опубликовано: (2015)

The Design of an Encryption Chip Using Vigenere Cipher/
по: Tan, Shih Peng
Опубликовано: (2011)

Portable phone directory using altera devices/
по: Vincent, Tiong Kwong
Опубликовано: (2011)

Portable phone directory using altera devices/
по: Mohammad Isa Ahmad Azan
Опубликовано: (2011)

Simulation of 0.35 Um NMOS process based on UniMAP Cleanroom facilities
по: Izny Atikah Ahmad Fahmi

Study of the effect of different gases parameter in dry etching process on etch rate profile
по: Zaharah Mohamad

Smart arm robot using visual basic program
по: Wee, Joo Ann

Design and implementation of a music box using FPGA
по: Tan, Kian Yiak

Portable Food Menu Directory Using Altera Devices/
по: Chi, Choong Tian
Опубликовано: (2011)

Design and implementation of a VGA display generator using FPGA
по: Haslinda Hassan

Design a current mirror using body driven technique
по: Siti Zawana Abdul Rani

RC car control using accelerometer sensor (RCC-A)
по: Alif Aizat Azraie Bin Ahmad Jaelan
Опубликовано: (2015)

Ultrasonic range meter using PIC19F876
по: Muhammad Shukran Ghanim

Fan control and monitoring system using visual basic program /
по: Khairul Hisyam Hasan
Опубликовано: (2008)

Development door locking system via bluetooh using 8051
по: Nesamalar Rukkumaran
Опубликовано: (2015)

Design and simulation of CMOS operational amplifier using mentor graphics tool
по: Ramalu, Jegatheesan Sri