Aging effect of sn-ag-cu lead free solder

Aging effect of sn-ag-cu lead free solder

This project is based on the aging effects on the creep behavior of Sn-Ag-Cu lead free solders. 2 types of alloy were studied which Sn-Ag-Cu eutectic and Sn-Pb eutectic alloy. Aging studies of SAC solder alloy have been performed in order to evaluate microstructure changes especially focusing on the...

Szczegółowa specyfikacja

Zapisane w:

Opis bibliograficzny
1. autor:	Mohd Jaffry Radzi (Autor)
Format:	Elektroniczne Oprogramowanie Baza danych
Język:	English
Hasła przedmiotowe:	Metallurgy.
Etykiety:	Dodaj etykietę Nie ma etykietki, Dołącz pierwszą etykiete!

Podobne zapisy

Effect of Zinc Additions on SN-0.7CU-0.05NI Lead Free Solder Alloy /
od: Nurul Ashikin Saleh
Wydane: (2017)

Effect of corrosion in acidic solution to the phase and microstructure of sn-cu solder/
od: Gan, Zhi Wan
Wydane: (2016)

Effect of polarization scan rate on corrosion in acidic solution to the properties of Sn-Cu solder/
od: Low, Suk Yen
Wydane: (2016)

Synthesis and Characterization of Lead Free SnCu & SnCu/SiC composite solder paste /
od: Nur Syahirah Mohamad Zaimi
Wydane: (2017)

Effect of current stressing on intermetallic formation and mechanical properties of lead free sac solder and sac/activated carbon composite solder joint/
od: Syahirah Alyaa Yahya
Wydane: (2016)

Microstructure development of Al-Mg-Si-Cu powder metallurgy under different addition of Sn
od: Khairunnisa Omar

The Effect of Thermal Aging on Intermetallic Compound Growth of SAC/Activated Carbon(AC) Composite Solder /
od: Norhafifah Binti Zainal Azlin
Wydane: (2016)

Application Of Ag/Zno Nanoparticles As Photocatalyst For Self Cleaning Fabric /
od: Siti Zulaiha Mohmad Sahbudin
Wydane: (2017)

Effect of corrosion in acidic solution to the phase and microstructure of sac305 solder /
od: Khoo, Cheng Hao
Wydane: (2016)

The Effect of Nickel Addition for Glass Formability of Cu-Ti-Ni Amorphous Alloy /
od: Wan Ahmad Aiman Wan Salleh
Wydane: (2017)

Effect of temperature of electrolyte and anodizing voltage on the synthesis of cu2o nanostructures by anodizing/
od: Chew, Jun Yuen
Wydane: (2016)

The properties and photocatalytic behaviour of TiO2 and ZnO particles after modification with PVP and ag nanoparticles/
od: Mohd Faidhiradhi Mohd Fazuki
Wydane: (2016)

Development of Al-Ni-Cu Amorphous Alloy Powder /
od: Norliyana Mustapar
Wydane: (2017)

Effect of aging period on magnesium sacrificial anode
od: Najihah Adam

Effect of ratio of ethylene glycol/water and concentration of ammonium fluoride on the synthesis of Cu2o nanostructures By Anodizing/
od: Yeoh, Shi Rou
Wydane: (2016)

A study on the effect of temperature on morphology of precipitate dolomite /
od: Mohd Afzal Mohd Radzi
Wydane: (2016)

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts
od: Khairul Nazri Taha

Recovery of copper (Cu) from printed circuit board (PCB) using lakos separator
od: Syed Aqil Syed Nadzir

Effect of particle size and milling process on the microstructure and thermal properties of copper silicon carbide (CuSiC) composites for electronic packing application
od: Chuah, Run Yi

Effect of solution treatment and aging period on magnesium sacrificial anode in backfill and soil environment
od: Rogemah Ramli

Effects of volume fraction and particle size reinforcement parameter to microstructure and thermal properties of copper silicon carbide (CuSiC) composite for electronic pakaging application
od: Siti Amira Faisha Shikh Zakaria

Effect of hygrothermal ageing on mechanical properties, swelling behavior and morphology of wood powder filled low-density polyethylene composite
od: Norazraini Afiqa Mohd Jamari

Reliability analysis of Sn-Ag-Cu-Ni lead free solders during isothermal aging process /
od: Mohamad Shafiq Jamaludin
Wydane: (2019)

Reliability analysis of Sn-Ag-Cu-Ni lead free solders during isothermal aging process /
od: Mohamad Shafiq Jamaludin
Wydane: (2019)

The effect of thermo-oxidative aging on the mechanical properties and FTIR analysis of sugarcane fiber filled polypropylene composite
od: Muhammad Arif Mat Saat

Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
od: Khairul Khusairi Kamaludin

Modelling aging kinetics of aluminium alloy aa2124/
od: Tiaw, Wei Ping
Wydane: (2016)

Modelling aging kinetics of aluminium alloy AA2124/
od: Mohamad Zulhilmi Bin Md Nasir
Wydane: (2016)

Sintering behavior and microstructural characterization of aluminium copper powder compact (al-4.4cu-0.8si-0.5mgwt%) alloy prepared by powder metallurgy
od: Looi, Mei Yen

The Effect Of Temperature On The Nitriding Of Aluminium /
od: Nur Farhana Mohd Firdaus Ravi
Wydane: (2017)

The effect of barium oxide to the properties of natural hydroxyapatite
od: Mohd Khairul Izzany Mohd Khair

Effect Geopolymer Coating On Mild Steel /
od: Muhammad Faiz Bin Mohd Fazill
Wydane: (2016)

Effect of polyethylene glycol to hydroxyapatite water filter
od: Mohd Zaaim Mat Daud

The effect of alloying elements in sintered-recycle steel compaction
od: Mohd Fauzi Jaafar

A potential of corncob powder as filler in thermoplastic polyurethane (tpu) composites /
od: Nur Fatin Hidayu Mohd Radzi
Wydane: (2016)

Study the effect of replacement of fly ash on ordinary portland cement/
od: Ahmad Nasaruddin Bin Mohd
Wydane: (2016)

Effect of the stabilizers on properties of natural rubber latex/
od: Sharmini A/P Joseph Pereira
Wydane: (2016)

Characterization on the effect of electrospinning parameters on polyacrylonitrile (Pan)/
od: Nurul Azni Binti Bakaruddin
Wydane: (2016)

Effect of solution treatment temperature on the microstructure of fe-40ni-24cr alloy /
od: Nuraliah Nazirah Mohd Hassan
Wydane: (2016)

Effect of solution treatment period on magnesium sacrificial anode
od: Norliawati Nor Azman