The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts

The effect of cooling condition on the microstructure and properties of Al-4.4Cu-0.8Si-0.5Mg powder compacts

The aim of this final year project is to study the effect of cooling condition on microstructure and properties of Al alloy. Powder compacts from a premixed commercial aluminium powder Al-4.4Cu-0.8Si-0.5Mg (wt %) grade have been sintered and passed through a different cooling method process.

में बचाया:

ग्रंथसूची विवरण
मुख्य लेखक:	Khairul Nazri Taha (लेखक)
स्वरूप:	इलेक्ट्रोनिक सॉफ्टवेयर डेटाबेस
भाषा:	English
विषय:	Metallurgy.
टैग :	टैग जोड़ें कोई टैग नहीं, इस रिकॉर्ड को टैग करने वाले पहले व्यक्ति बनें!

समान संसाधन

Sintering behavior and microstructural characterization of aluminium copper powder compact (al-4.4cu-0.8si-0.5mgwt%) alloy prepared by powder metallurgy
द्वारा: Looi, Mei Yen

Microstructure development of Al-Mg-Si-Cu powder metallurgy under different addition of Sn
द्वारा: Khairunnisa Omar

Characterization of casting alloy Al 319 (Al-12Si-4Cu-0.1Mg), PROTON cylinder head
द्वारा: Khairul Khusairi Kamaludin

Effect of Zinc Additions on SN-0.7CU-0.05NI Lead Free Solder Alloy /
द्वारा: Nurul Ashikin Saleh
प्रकाशित: (2017)

Sintering atmosphere effect on AI-0.2mg alloy
द्वारा: Muhammad Firdaus Rosli

Microstructural and thermal studies of as-cast al-si-mg alloys
द्वारा: Lokman Hakim Ibrahim

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
द्वारा: Muhammad Afiq Bin Mohd Razak
प्रकाशित: (2016)

Development of Al-Ni-Cu Amorphous Alloy Powder /
द्वारा: Norliyana Mustapar
प्रकाशित: (2017)

Effect of corrosion in acidic solution to the phase and microstructure of sn-cu solder/
द्वारा: Gan, Zhi Wan
प्रकाशित: (2016)

The anodizing of sintered mg/ca alloys/
द्वारा: Norhadira Fatin Binti Wardi
प्रकाशित: (2016)

Effects of T6 treatment on the microstructural changes, hardness and thermal analysis of As-Cast Al-Si-Mg alloys
द्वारा: Izrul Azree Mohd Zaki

Mgnetic properties of perovskite oxide, nD1-xcExcOo3 with different percents of composition where x =0%, 0.25%, 0.50%, 0.75%/
द्वारा: Zamierul Helmy Zailudin
प्रकाशित: (2016)

Anodizing process of Mg alloy using low potential /
द्वारा: Siti Auni Shafiqah Makhtar
प्रकाशित: (2017)

Effect of particle size and milling process on the microstructure and thermal properties of copper silicon carbide (CuSiC) composites for electronic packing application
द्वारा: Chuah, Run Yi

Effects of volume fraction and particle size reinforcement parameter to microstructure and thermal properties of copper silicon carbide (CuSiC) composite for electronic pakaging application
द्वारा: Siti Amira Faisha Shikh Zakaria

Aging effect of sn-ag-cu lead free solder
द्वारा: Mohd Jaffry Radzi

Failure analysis simulation of polymeric foam composite using ansys 15.0/
द्वारा: Mohamad Akbar Bin Khairudeen
प्रकाशित: (2016)

Study the mechanical properties and microstructure on steel products
द्वारा: Khairul Nizam Hashim

The effect of alloying elements in sintered-recycle steel compaction
द्वारा: Mohd Fauzi Jaafar

The Effect of Nickel Addition for Glass Formability of Cu-Ti-Ni Amorphous Alloy /
द्वारा: Wan Ahmad Aiman Wan Salleh
प्रकाशित: (2017)

Recovery of copper (Cu) from printed circuit board (PCB) using lakos separator
द्वारा: Syed Aqil Syed Nadzir

Effect of temperature of electrolyte and anodizing voltage on the synthesis of cu2o nanostructures by anodizing/
द्वारा: Chew, Jun Yuen
प्रकाशित: (2016)

Effect of polarization scan rate on corrosion in acidic solution to the properties of Sn-Cu solder/
द्वारा: Low, Suk Yen
प्रकाशित: (2016)

Effect of corrosion in acidic solution to the phase and microstructure of sac305 solder /
द्वारा: Khoo, Cheng Hao
प्रकाशित: (2016)

Mechanical And Thermal Performance Of Lightweight Geopolymers Foamed Using Aluminium Powder/
द्वारा: Mohamed Aliff Izham Mohamed Zakhari
प्रकाशित: (2017)

Study of fabrication AI-Tin slag composite by powder metallurgy method
द्वारा: Muhammad Syazwan Abdul Manan

A study of hardcoat anodizing on Powder Metallurgy AIuminium-Magnesium composite
द्वारा: Mohd Nasuha Ab. Halim

A potential of corncob powder as filler in thermoplastic polyurethane (tpu) composites /
द्वारा: Nur Fatin Hidayu Mohd Radzi
प्रकाशित: (2016)

Study On The Microstructure and Properties of Al-Zn Alloy Fabricated By Sand Casting Process /
द्वारा: Syed Mohd Fikri Syed Sulaiman
प्रकाशित: (2017)

Effect of ratio of ethylene glycol/water and concentration of ammonium fluoride on the synthesis of Cu2o nanostructures By Anodizing/
द्वारा: Yeoh, Shi Rou
प्रकाशित: (2016)

A study of microstructure and mechanical properties of copper filled polypropylene and copper filled epoxy
द्वारा: Nor Riza Kamalul Baharim

Effect of solution treatment temperature on the microstructure of fe-40ni-24cr alloy /
द्वारा: Nuraliah Nazirah Mohd Hassan
प्रकाशित: (2016)

Effect of post-reflow cooling rate and isothermal aging on imc formation between Sn-3.0Ag-0.5Cu-0.5Ni lead-free Solders and Enimag /
द्वारा: Zolhafizi Jaidi
प्रकाशित: (2016)

Development of powder metallurgy route for production of novel fe-al intermetallics for high temperature applications /
द्वारा: Fazimah Mat Noor
प्रकाशित: (2009)

The effects of coconut husk fiber versus coconut shell powder in thermoplastic polyurethane (tpu) composites /
द्वारा: Nor Suhaida Mohamad Sadli
प्रकाशित: (2016)

Administrator 4.0 .
प्रकाशित: (2003)

Administrator 4.0

Lattice imperfections in intermetallic ti-al alloys: an x-ray diffraction study of the microstructure by the rietveld method
द्वारा: Lee, Liu Mei

Mechanical properties of copper ferrite cufe2o4-polymer composite fabricated using 3d printer/
द्वारा: Lee, Chye Heng
प्रकाशित: (2016)

Development of elemental powder metallurgy route for production of novel nanostructured FeAl intermetallics for high temperature applications /
प्रकाशित: (2010)