Effect of current stressing on intermetallic formation and mechanical properties of lead free sac solder and sac/activated carbon composite solder joint/

Effect of current stressing on intermetallic formation and mechanical properties of lead free sac solder and sac/activated carbon composite solder joint/

This study will investigate the effects of current stressing on intermetallic compound growth and the mechanical properties of lead free SAC and SAC/Activated carbon solder composite solder joint for certain current stressing time.. Soldered wires will be set up on the power supply with current 0.20...

Disgrifiad llawn

Wedi'i Gadw mewn:

Manylion Llyfryddiaeth
Prif Awdur:	Syahirah Alyaa Yahya (Awdur)
Fformat:	Traethawd Ymchwil Meddalwedd eLyfr
Iaith:	English
Cyhoeddwyd:	Perlis, Malaysia School of Materials Engineering, University Malaysia Perlis 2016
Pynciau:	Metallurgy.
Tagiau:	Ychwanegu Tag Dim Tagiau, Byddwch y cyntaf i dagio'r cofnod hwn!

Eitemau Tebyg

The Effect of Thermal Aging on Intermetallic Compound Growth of SAC/Activated Carbon(AC) Composite Solder /
gan: Norhafifah Binti Zainal Azlin
Cyhoeddwyd: (2016)

Effect of corrosion in acidic solution to the phase and microstructure of sac305 solder /
gan: Khoo, Cheng Hao
Cyhoeddwyd: (2016)

Aging effect of sn-ag-cu lead free solder
gan: Mohd Jaffry Radzi

The effect of multiple reflow soldering for SAC305 and SAC405 on lead-free solder /
gan: Noraini Abdul Kadir
Cyhoeddwyd: (2015)

Effect of Zinc Additions on SN-0.7CU-0.05NI Lead Free Solder Alloy /
gan: Nurul Ashikin Saleh
Cyhoeddwyd: (2017)

The effect of polarization scan rate on the corrosion properties of sac305 in acidic solution /
gan: Adelyn, Ooi Kim Kee
Cyhoeddwyd: (2016)

Effect of corrosion in acidic solution to the phase and microstructure of sn-cu solder/
gan: Gan, Zhi Wan
Cyhoeddwyd: (2016)

Effect of polarization scan rate on corrosion in acidic solution to the properties of Sn-Cu solder/
gan: Low, Suk Yen
Cyhoeddwyd: (2016)

Intermetallic formation between lead free solder and copper substrate /
gan: Muhammad Aliff Md Ali
Cyhoeddwyd: (2014)

Properties of carbon nanotubes and calcium carbonates in polymer composites/
gan: Noor Azwa Binti Mohd Noor
Cyhoeddwyd: (2016)

The effect of thermal aging on the oxidation of solder joint using SAC305 /
gan: Izzat Syazani Abdul Latif
Cyhoeddwyd: (2018)

The effect of thermal aging on the oxidation of solder joint using SAC305 /
gan: Izzat Syazani Abdul Latif
Cyhoeddwyd: (2018)

The effect of thermal aging on the oxidation of solder joint using SAC305 /
gan: Izzat Syazani Abdul Latif
Cyhoeddwyd: (2018)

The effect of thermal aging on the oxidation of solder joint using SAC305 /
gan: Izzat Syazani Abdul Latif
Cyhoeddwyd: (2018)

Physical properties of Ti1-XMXAl intermetallic alloy (M = La, Ce; X = 0.25, 0.5) /
gan: Muhammad Afiq Bin Mohd Razak
Cyhoeddwyd: (2016)

Synthesis and characterization of Cobalt/Calcium Carbonate catalyst in the production of Carbon Nanotubes/
gan: Ong, Huey Lin
Cyhoeddwyd: (2017)

Development od SiC reinforced SnCu and SAC based lead-free solder composite via powder metallurgy route / Zawawi bin Mahim
gan: Zawawi Mahim
Cyhoeddwyd: (2018)

Synthesis and Characterization of Lead Free SnCu & SnCu/SiC composite solder paste /
gan: Nur Syahirah Mohamad Zaimi
Cyhoeddwyd: (2017)

Lead-free soldering /
Cyhoeddwyd: (2007)

Lead-free soldering
Cyhoeddwyd: (2007)

Lead-free soldering
Cyhoeddwyd: (2007)

Lead-free soldering
Cyhoeddwyd: (2007)

Influence of H2S04 solution on formation of porous AAO thin film
gan: Nornani Md Aznan

Influence of H2S04 solution on formation of forous AAO thin film
gan: Puteri Normiyani Abu Hassan

Controlling the synthesis parameter during fe(OH)2 precipitation for goethite formation /
gan: Noraishah Binti Mohamed Noor
Cyhoeddwyd: (2016)

Fabrication of SAC107 and Sn-0.7Cu lead free composite solder reinforced with Si3N4 via powder metallurgy route /
gan: Norhayanti Mohd Nasir
Cyhoeddwyd: (2017)

Development of powder metallurgy route for production of novel fe-al intermetallics for high temperature applications /
gan: Fazimah Mat Noor
Cyhoeddwyd: (2009)

Development od SiC reinforced SnCu and SAC based lead-free solder composite via powder metallurgy route / \c Zawawi bin Mahim
gan: Zawawi Mahim
Cyhoeddwyd: (2018)

Optimisation of anodising parameter with oxalic acid for the formation of anodic aluminium oxide by using taguchi methods /
gan: Nor Syammimi Binti Abu Hasan
Cyhoeddwyd: (2016)

Properties of CNTs/Calcium Carbonate Filled Polymer composites /
gan: Siti Maisarah Suhaimi
Cyhoeddwyd: (2017)

Development of elemental powder metallurgy route for production of novel nanostructured FeAl intermetallics for high temperature applications /
Cyhoeddwyd: (2010)

Understanding the effect of oxidation on the interfacial diffusion of solder joint using SAC 305 /
gan: Muhd Abd Azim Al Hafiz Shahri
Cyhoeddwyd: (2019)

Understanding the effect of oxidation on the interfacial diffusion of solder joint using SAC 305 /
gan: Muhd Abd Azim Al Hafiz Shahri
Cyhoeddwyd: (2019)

Agricultural residues as precursors for activated carbon production (rice husk)
gan: Nur Hasyimah Mohd Kamaluddin

Agricultural residues as precursors for activated carbon production (coconut waste) /
gan: Zatil Alyani Mohd Amin
Cyhoeddwyd: (2008)

Mechanical properties of kenaf and calcium carbonate with unsaturated polyester composites /
gan: Siti Nur Ain Binti Che Hussain
Cyhoeddwyd: (2016)

Preparation and characterization of ldpe/tps blend filled with calcium carbonate /
gan: Anis Adila Binti Ab Halim
Cyhoeddwyd: (2016)

The influence of welding parameters and corrosive environment on the joint strength of resistance spot-welded mild steel sheets
gan: Ahmad Azid Tahar Ahmad Latiffi

Study effect of welding current on mechanical properties of galvanized steel sheets in resistance spotwelding
gan: Muhammad Rifki Ismail

Influence of phosphoric acid (H3P04) solution on formation of porous anodic aluminum oxide (AAO) thin film
gan: Norul Fatihah Abdul Hadi