Natural vaporization system of lake water using plastic plate /

Natural vaporization system of lake water using plastic plate /

The objective of this project is to convert lake water into drinking water, to analyze relation between natural vaporization system using plastic plate and to analyze pH, Calcium Carbonate (CaCO3) and Magnesium Carbonate (MGCO3) scientific value of lake water before and after experiment.

Сохранить в:

Библиографические подробности
Главный автор:	Mohd Halim Bin Tukimin (Автор)
Формат:	Диссертация Программное обеспечение eКнига
Язык:	English
Опубликовано:	Perlis, Malaysia School of Manufacturing Engineering, University Malaysia Perlis 2010
Предметы:	Industrial engineering.
Метки:	Добавить метку Нет меток, Требуется 1-ая метка записи!

Схожие документы

Natural vaporization system of seawater using plastic plate/
по: Chung, Lee Ping
Опубликовано: (2010)

Analysis of strength on the thick plate part using response surface methodology /
по: Zamri Bin Razali
Опубликовано: (2016)

Analysis of strength on thick plate part using taguchi method /
по: Amir Syahir Bin Shah Bani
Опубликовано: (2016)

Analysis of shrinkage on the thick plate part using response surface methodology (RSM)/
по: Muhammad IsafiQ Bin Mohd Disa
Опубликовано: (2016)

Analysis of shrinkage on thick plate part using genetic algorithm /
по: Siti Noor Najihah Mohd Nasir
Опубликовано: (2016)

Analysis of strength on the thick plate part using genetic algorithm/
по: Syed Mohd Azlan Syed Othman
Опубликовано: (2016)

Design and analysis mould for plastic injection moulding /
по: Fadzli Bin Idris
Опубликовано: (2010)

Analysis of shrinkage on thick plate part using genetic algorithm /
по: Siti Noor Najihan Binti Mohd Nasir
Опубликовано: (2016)

Production of amour plate by compaction interlater powder press surpasses 3000 tonne /
по: Mohd Asyraaf Bin Norazmi
Опубликовано: (2016)

Analysis of strength on the thick plate part using genetic algorithm method /
по: Syed Mohd Azlan Syed Othman
Опубликовано: (2016)

Analysis of strength on thick plate part using taguchi method /
по: Amir Syahir Shah Bani
Опубликовано: (2016)

Improvement of plastic roll change process on primary packing machine using lean and six sigma approaches /
по: Zulazha Bin Sehak
Опубликовано: (2016)

Energetic analysis on Ap-X process for liquefaction of natural gas using open source software /
по: Mohd Khairulnazreen Bin Zahari
Опубликовано: (2016)

Analysis of shrinkage on the thick plate part using response surface methodology (RSM) /
по: Muhammad Isafiq Mohd Disa
Опубликовано: (2016)

Analysis of strength on the thick plate part using response surface methodology/
по: Zamri Razali
Опубликовано: (2016)

A study of thin shell plastic part quality in the plastic injection molding/
по: Norazmimi Bt Zahari
Опубликовано: (2010)

Energetic analysis on MR-X Process for liquefaction of natural gas using open source software /
по: Muhammad Nur Hafiz Bin Shaidan
Опубликовано: (2016)

Feasibility study on capturing wind for effective natural ventilation /
по: Azim Bin Shuib @ Md Shuaib
Опубликовано: (2016)

Production of amour plate by compaction inter-layered powder press surpasses 3000 tonne /
по: Mohd Asyraaf Norazmi
Опубликовано: (2016)

Natural ventilation design of a terrace house
по: Mohd Azril Mahazan
Опубликовано: (2010)

Energetic analysis on AP-X process for liquefaction of natural gas using open source software /
по: Mohd Khairulnazreen Zahari
Опубликовано: (2016)

Investigate mechanical properties of laminate flax fabric composite plate with different laminate code lamination /
по: Nurul Farhanah Mohd Salehuddin
Опубликовано: (2016)

Investigate mechanical properties of laminate flax fabric composite plate with different laminate code lamination /
по: Nurul Farhanah Bt Mohd Salehuddin
Опубликовано: (2016)

Feasibility study and design of natural dehumidification method using desiccant for model house /
по: Mohammed Amirul Faeez Norazmi
Опубликовано: (2016)

Energetic analysis on C3MR process for liquefaction on natural gas using open source software /
по: Muhammad Luqman Mohd Idris
Опубликовано: (2016)

Improvement of plastic roll change process on primary packing machine using lean and six sigma approaches/
по: Zulazha Sehak
Опубликовано: (2016)

Energetic analysis on MR-X process for liquefaction of natural gas using open source software /
по: Muhammad Nur Hafiz Shaidan
Опубликовано: (2016)

Investigation of usage of water as blast mitigator for high impact penetrator /
по: Mohd Shamer Mohd Mokhtar
Опубликовано: (2016)

Investigate of usage of water as blast mitigator for high impact penetrator /
по: Mohd Shamer Mohd Mokhtar
Опубликовано: (2016)

Design and fabricction of an water chamber for high impact penetrator /
по: Mohamad Fikri Mohd Ishak
Опубликовано: (2016)

Design and fabrication of an water chamber for high impact penetrator/
по: Mohamad Fikri Mohd Ishak
Опубликовано: (2016)

Optimization parameter effects on the strength of the three-dimensional printing (3d Printing) fused deposotion modeling (FDM) process/
по: Naim Bin Abd Halim
Опубликовано: (2016)

Cement mixture using waterfall stone powder of Titi Hayun Kedah/
по: Mohd Hafiz Bin Rodzi
Опубликовано: (2010)

A study on surface roughness of wood using CNC milling process/
по: Mohd. Suhairi Bin Saary
Опубликовано: (2016)

Simulation on usage of water to an explosive compaction /
по: Nor Azmaliana Binti Azmi
Опубликовано: (2016)

Simulation on usage of water to an explosive compaction/
по: Nor Azmaliana Azmi
Опубликовано: (2016)

Experimental performance of refrigaration system using R134A-L203 nanorefrigerant/
по: Mohamed Syahiriza Bin Mohamed Yusoff
Опубликовано: (2016)

Economic analysis on prico process for liquefaction of natural gas /
по: Aida Izwana MD Bakhri
Опубликовано: (2016)

Economic analysis on prico process for liquefaction of natural gas /
по: Aida Izwana MD Bakhri
Опубликовано: (2016)

Investigate mechanical properties of hybrid laminated flax/glass fabric composite plate with different laminate code lamination/
по: Nur Syahira Bt Rahman@wagi
Опубликовано: (2016)