Study on single strut formation using additive layer manufacturing /

Study on single strut formation using additive layer manufacturing /

Näytä muut versiot (1)

Tallennettuna:

Bibliografiset tiedot
Päätekijä:	Chee, Ying Chen (Tekijä)
Aineistotyyppi:	Tietokoneohjelma E-kirja
Kieli:	English
Julkaistu:	2018.
Aiheet:	Three-dimensional printing. Structural design.
Tagit:	Lisää tagi Ei tageja, Lisää ensimmäinen tagi!

Samankaltaisia teoksia

Study on single strut formation using additive layer manufacturing /
Tekijä: Chee, Ying Chen
Julkaistu: (2018)

Study on lattice-structure node formation using additive layer manufacturing /
Tekijä: Jannatul Al-Qashah Muhd Ali Jinnah
Julkaistu: (2018)

Study on lattice-structure node formation using additive layer manufacturing /
Tekijä: Jannatul Al-Qashah Muhd Ali Jinnah
Julkaistu: (2018)

Effect of node enhancement on strength of body-centered-cubic (BCC) polymer lattice-structure material /
Tekijä: Ahmad Wahi Ab.Rahman
Julkaistu: (2018)

Effect of node enhancement on strength of body-centered-cubic (BCC) polymer lattice-structure material /
Tekijä: Ahmad Wahi Ab.Rahman
Julkaistu: (2018)

Effects of process parameters on strength of polymer lattice structure manufactured by using 3D printer
Tekijä: Ng, Wai Hoe
Julkaistu: (2017)

Effects of process parameters on strength of polymer lattice structure manufactured by using 3D printer
Tekijä: Ng, Wai Hoe
Julkaistu: (2017)

Investigation on similarities between 3D-printed single strut and struts in lattice- structure arrangement /
Tekijä: Muhammad Shahril Afzan Jailani
Julkaistu: (2019)

Investigation on similarities between 3D-printed single strut and struts in lattice- structure arrangement /
Tekijä: Muhammad Shahril Afzan Jailani
Julkaistu: (2019)

Layer adhesion investigation of 3D printer platform /
Tekijä: Nornarieyza Rosli
Julkaistu: (2017)

Layer adhesion investigation of 3D printer platform /
Tekijä: Nornarieyza Rosli
Julkaistu: (2017)

Investigation on process-properties relationship with load-bearing performance of lattice-structured cellular material for lightweight applications /
Tekijä: Rafidah Hasan, Dr, et al.
Julkaistu: (2019)

Investigation on process-properties relationship with load-bearing performance of lattice-structured cellular material for lightweight applications /
Tekijä: Rafidah Hasan, Dr, et al.
Julkaistu: (2019)

Understanding additive manufacturing
Tekijä: Gebhardt, Andreas
Julkaistu: (2012)

Understanding additive manufacturing
Tekijä: Gebhardt, Andreas
Julkaistu: (2012)

Analysis on components produced using wire arc additive manufacturing /
Tekijä: Fatin Nazirah Binti Ismail
Julkaistu: (2019)

Analysis on components produced using wire arc additive manufacturing /
Tekijä: Fatin Nazirah Binti Ismail
Julkaistu: (2019)

3D printing technology, applications, and selection
Tekijä: Noorani, Rafiq
Julkaistu: (2018)

3D printing technology, applications, and selection
Tekijä: Noorani, Rafiq
Julkaistu: (2018)

Friction based additive manufacturing technologies : principles for building in solid state, benefits, limitations, and applications /
Tekijä: Rathee, Sandeep, et al.
Julkaistu: (2018)

Friction based additive manufacturing technologies : principles for building in solid state, benefits, limitations, and applications /
Tekijä: Rathee, Sandeep, et al.
Julkaistu: (2018)

Design and manufacturing of protective mask : modeling and fabrication of low-cost device using additive manufacturing technology /
Tekijä: Ahmad Afiq Baharuddin
Julkaistu: (2018)

Design and manufacturing of protective mask : modeling and fabrication of low-cost device using additive manufacturing technology /
Tekijä: Ahmad Afiq Baharuddin
Julkaistu: (2018)

A study on selective laser sintering behaviour and processing of polymer powder mixtures /
Tekijä: Ng, Rui Ying
Julkaistu: (2019)

A study on selective laser sintering behaviour and processing of polymer powder mixtures /
Tekijä: Ng, Rui Ying
Julkaistu: (2019)

Feasibility study of dental crown manufacturing by using rapid prototyping and CNC technology towards digital dental manufacturing /
Tekijä: Wan Nur Amirah Wan Muhamad
Julkaistu: (2019)

Feasibility study of dental crown manufacturing by using rapid prototyping and CNC technology towards digital dental manufacturing /
Tekijä: Wan Nur Amirah Wan Muhamad
Julkaistu: (2019)

Effect of layer thickness and fill angle on flexural properties of carbon fibre reinforced ABS printed part /
Tekijä: Amirah Diyana Ahmad Azan
Julkaistu: (2017)

Effect of layer thickness and fill angle on flexural properties of carbon fibre reinforced ABS printed part /
Tekijä: Amirah Diyana Ahmad Azan
Julkaistu: (2017)

Thermal behavior of additve manufacturing process
Tekijä: Muhammad Fayyadh Izzat Azmi
Julkaistu: (2015)

Thermal behavior of additve manufacturing process
Tekijä: Muhammad Fayyadh Izzat Azmi
Julkaistu: (2015)

3D printing and additive manufacturing : principles and applications /
Tekijä: Chua, Chee Kai, et al.
Julkaistu: (2017)

3D printing and additive manufacturing : principles and applications /
Tekijä: Chua, Chee Kai, et al.
Julkaistu: (2017)

Comparative study of additive manufacturing on intricate part /
Tekijä: Nur Syahirah Nabihah Muhammad Nor
Julkaistu: (2019)

Comparative study of additive manufacturing on intricate part /
Tekijä: Nur Syahirah Nabihah Muhammad Nor
Julkaistu: (2019)

Additive manufacturing in medical application, a comparative study between conventionally made prosthesis (pylon) and fused deposition modelling prosthesis (pylon)
Tekijä: Mohammad Aizrulshah Kamaruddin
Julkaistu: (2017)

Additive manufacturing in medical application, a comparative study between conventionally made prosthesis (pylon) and fused deposition modelling prosthesis (pylon)
Tekijä: Mohammad Aizrulshah Kamaruddin
Julkaistu: (2017)

Investigation on mechanical and thermal properties of 100% recycled 3D printed ABS material /
Tekijä: Anis Hazirah Samat
Julkaistu: (2019)

Investigation on mechanical and thermal properties of 100% recycled 3D printed ABS material /
Tekijä: Anis Hazirah Samat
Julkaistu: (2019)

Surface pressure distribution of 3D printed ball bearing with internal structure formation using CAE /
Tekijä: Muhammad Zulhimi Nordin
Julkaistu: (2019)